
Генератор 12V 110A AB3910300AG для FORD2.2 3.2 BT50 2.2L
Применимый тип:FORD2.2 3.2 BT50 2.2L
Номер запчасти: UK01-18300-C Ab3910300A F000bl0639 AB39-100300-AF UK01-18-300 K01-18-300C, UK01-18-300B, AB3910300AE, AB39-10300-AD AB3910300AG U212-18-300 UK01-18-300A, AB39-10300-AF, UK01-18-300D, F000BL0639/UK01-18-300/AB3910300AE AB39-10300-A 5287955,AB39-10300-AG,UK01-18-300D 1916724, AEK3882, 5287955, AB39-10300-AG, UK01-18-300D,UK01-18-300,1916724,AEK3882,UK0118300 F000BL06BK AB3910300AD AB3910300XI AB3910300AE AB3910300AF AB3910300AG AB39-10300-AE 2011-LRA03882 F000BL0639 AB39-10300-XI
| Номинальный выход : | 12V 110A |
| Pulley : | 7PK |
| Размер : | 24*18*17single unit inner box |
| Вес : | Вес нетто 5,5 кг, вес брутто 5,8 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | генератор |
| Спецификация : | 12V 110A |
| Блок : | 7PK |
| Марка : | nuojin |
| Цифры : | AB3910300AG |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |







Overview of the AB3910300AG Alternator
This AB3910300AG alternator is the 12V, 110A replacement for FORD2.2 3.2 BT50 2.2L applications. The housing, pivot points and B+ terminal follow the original design, which means the unit drops into the existing bracket and reuses the factory belt.
Every unit is tested at the factory for output at idle and at speed, ripple current, regulator cut-in voltage and bearing noise, because those four values decide whether it behaves like the original.
Specification Summary
- Rated voltage: 12V
- Rated output: 110 A
- Pulley: 7-groove PK
- Regulator: integrated, machine sensed
- Application: FORD2.2 3.2 BT50 2.2L
- Net weight: approximately 5.5 kg
- Condition: new, direct replacement for the original unit
The 12V, 110A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The OEM and aftermarket references listed for this alternator are:
- AB3910300AG
- BT-50
- UK01-18-300
- AB3910300AF
- F000BL0639
- AEK3882
- UK01-18300-C
- Ab3910300A
- AB39-100300-AF
- K01-18-300C
- UK01-18-300B
- AB3910300AE
- AB39-10300-AD
- U212-18-300
- UK01-18-300A
- AB39-10300-AF
Several numbers in this list refer to the complete assembly while others cover the bare machine. A photograph of the rear cover protects against the most common ordering error. This unit is listed with 16 references in total.
Matching the Unit to the Vehicle
FORD2.2 3.2 BT50 2.2L models in this range share the same mounting bracket and belt layout, which is why one reference serves several years of production. Fitment is decided by the number on the unit, not by the model year alone.
If the number on the old alternator falls outside the list above, send the engine code and a photograph of the rear cover before ordering. A unit with the right housing but a different regulator plug will not connect cleanly.
How This Alternator Fails
The diode rectifier is usually the first casualty. Six diodes convert the AC output to DC, and when one fails the alternator still charges but with a ripple that upsets the battery and the vehicle electronics.
Oil mist from a leaking cam or crank seal attacks the internal insulation. A unit that is oily on the outside is often already failing inside, even if the output still looks normal on a meter.
Signs of a Failing Alternator
- Battery warning lamp glowing at idle and fading at speed
- Headlights that brighten when the engine is revved
- Battery flat after a few days of short trips
- Whine or rumble that rises with electrical load
- Burning smell from the alternator after a long drive
Measure charging voltage at the battery posts with the engine idling and all accessories off. A healthy unit holds about 13.8 to 14.7V on a 12V system; below 13.2V or above 15V points to the alternator or its regulator rather than the battery.
Pre-Fit Checklist
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
Most charging comebacks trace back to a battery or belt problem that was already there. Check those two first, then fit the alternator once and correctly.
Installation Notes
Disconnect the battery negative terminal first, then release the belt tension and slip the belt off the pulley. Remove the B+ cable and the regulator plug before the mounting bolts.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Every batch is inspected for housing dimensions, pulley alignment and terminal integrity, and each unit is bench tested for output, ripple and regulator cut-in before it is boxed in neutral cartons with foam protection.
Common references are held in stock, volume orders ship in around 30 days and every unit carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
What charging voltage should I see?
Around 13.8 to 14.7V at idle on a 12V system, and about 27.5 to 28.5V on a 24V system, measured at the battery posts.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Why does the battery light glow at idle?
Usually a worn regulator, a slipping belt or a diode fault. Check belt tension and charging voltage before replacing the unit.

