
Генератор 12V 210A BK2T-10300-DA для Ford Tourneo 2.2TDCi 12‑, Ford Flat‑Chassis 2.2TDCi 13‑
Применимый тип:Ford Tourneo 2.2TD Ci 12‑, Ford Flat‑Chassis 2.2TD Ci 13‑
Номер запчасти:1768612,1820604,1874791,1874991, 1874997 2415014,2545297 0125811013 0125811014,0125811015,0125811016 0125811083 0125811084,0125811085,0125811086 ALB2516UX ALB5085DD,ALB5085UX, ALB9516KL ALB2516WA 443402,443414 301N21163Z
| Номинальный выход : | 12V 210A |
| Pulley : | 6PK |
| Размер : | |
| Вес : | Вес нетто 7,95 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | генератор |
| Спецификация : | 12V 210A |
| Блок : | 6PK |
| Марка : | NUOJIN |
| Цифры : | BK2T-10300-DA |
| Качество : | НОВЫЙ |
| Время поставки : | 30 дней |







Overview of the BK2T-10300-DA Alternator
For Ford Tourneo 2.2TDCi 12‑, Ford Flat‑Chassis 2.2TDCi 13‑ owners chasing a battery light or a slowly flattening battery, the BK2T-10300-DA is a 12V, 210A alternator supplied as a complete unit with its regulator and rectifier already fitted.
Every unit is tested at the factory for output at idle and at speed, ripple current, regulator cut-in voltage and bearing noise, because those four values decide whether it behaves like the original.
Technical Summary
- Rated voltage: 12V
- Rated output: 210 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: Ford Tourneo 2.2TDCi 12‑, Ford Flat‑Chassis 2.2TDCi 13‑
- Net weight: approximately 7.95 kg
- Condition: new, direct replacement for the original unit
The 12V, 210A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The alternator is supplied against the following references, which help identify it against the unit already fitted to the vehicle:
- BK2T-10300-DA
- BK2T10300DA
- BK2T10300DB
- BK3T10300EA
- BK3T10300EB
- RMBK2T10300DB
- 1768612
- 1874791
- 1874991
- 1874997
- 2415014
- 2545297
- 0125811013
- 0125811014
- 0125811015
- 0125811016
Several numbers in this list refer to the complete assembly while others cover the bare machine. A photograph of the rear cover protects against the most common ordering error. This unit is listed with 16 references in total.
Fitment and Application
Ford Tourneo 2.2TDCi 12‑, Ford Flat‑Chassis 2.2TDCi 13‑ models in this range share the same mounting bracket and belt layout, which is why one reference serves several years of production. Fitment is decided by the number on the unit, not by the model year alone.
Vehicles that have had an engine or accessory drive belt conversion may already carry a different alternator, so treat the catalogue as a starting point rather than the final answer.
Failure Patterns
Oil mist from a leaking cam or crank seal attacks the internal insulation. A unit that is oily on the outside is often already failing inside, even if the output still looks normal on a meter.
The diode rectifier is usually the first casualty. Six diodes convert the AC output to DC, and when one fails the alternator still charges but with a ripple that upsets the battery and the vehicle electronics.
Fault Symptoms
- Battery warning lamp glowing at idle and fading at speed
- Headlights that brighten when the engine is revved
- Battery flat after a few days of short trips
- Whine or rumble that rises with electrical load
- Burning smell from the alternator after a long drive
Measure charging voltage at the battery posts with the engine idling and all accessories off. A healthy unit holds about 13.8 to 14.7V on a 12V system; below 13.2V or above 15V points to the alternator or its regulator rather than the battery.
Pre-Fit Checklist
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
Most charging comebacks trace back to a battery or belt problem that was already there. Check those two first, then fit the alternator once and correctly.
Installation Notes
With the battery isolated, relieve the belt tension, disconnect the B+ terminal and unplug the regulator connector, then remove the mounting bolts and lift the unit out.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Every batch is inspected for housing dimensions, pulley alignment and terminal integrity, and each unit is bench tested for output, ripple and regulator cut-in before it is boxed in neutral cartons with foam protection.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Why does the battery light glow at idle?
Usually a worn regulator, a slipping belt or a diode fault. Check belt tension and charging voltage before replacing the unit.
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
OE Reference: BK2T‑10300‑DA, interchangeable with BK2T‑10300‑DB, 12V 210A high‑output alternator, meets OEM specification
Vehicle Fitment: Fit for Ford Tourneo 2.2TDCi from 2012‑, Ford Flat‑Chassis 2.2TDCi from 2013‑, commercial diesel vehicles
210A heavy‑duty output: Sufficient power supply for commercial vehicle multiple electrical devices, avoids insufficient charging under idling and heavy‑load conditions
Freewheel clutch pulley equipped: Perfectly matches start‑stop system, reduces belt wear, lowers running noise and shock load
Direct OE replacement: Exact mounting points & connector, plug‑and‑play, no modification needed, save garage installation time
Heavy‑duty durable build: High‑temperature resistant winding, reinforced housing, excellent anti‑vibration performance for harsh commercial working conditions
Full performance test before shipment: Each alternator passes strict charging‑voltage & current test to guarantee stable performance
After‑sales Warranty support, reduce your procurement after‑sales risk

