
Генератор 12V 220A CAL15440 для Audi A4 A5 Q5 12V 230A, also fits BMW 5, X5
Применимый тип:Audi A4 A5 Q5 12V 230A, also fits BMW 5, X5
Номер запчасти:12317603779 12317575347 12317575344 12314595891 12317603782,115807,CAL15440, CAL15440AS, 12-31-7-603-782 12317603782 12-31-7-575-344, CAL15440ES 12-31-4-595-890 12314595890 12-31-4-595-891 CAL15440OS, CAL15440RS,11393N DA1847,DRA0737, ALV0203BS, ALV0203DD ALV0203KL,ALV0203WA,2543518,2543518A,439636, FG23S010 FG23S043 FG23S054 440203 ALV0203AN ALV0203GB 7603779
| Номинальный выход : | 12V 220A |
| Pulley : | 7PK |
| Размер : | |
| Вес : | Вес нетто 6,85 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | генератор |
| Спецификация : | 12V 220A |
| Блок : | 7PK |
| Марка : | NUOJIN |
| Цифры : | 12314595890 |
| Качество : | НОВЫЙ |
| Время поставки : | 30 дней |








Overview of the CAL15440 Alternator
For Audi A4 A5 Q5 12V 230A, also fits BMW 5, X5 owners chasing a battery light or a slowly flattening battery, the CAL15440 is a 12V, 220A alternator supplied as a complete unit with its regulator and rectifier already fitted.
Charging output depends on rotational speed and on the electrical load. A unit that produces 14.2V at idle with the lights off can still be marginal when the fan, lights and rear demister are all running, which is why a load test matters more than a no-load voltage reading.
Specification Summary
- Rated voltage: 12V
- Rated output: 220 A
- Pulley: 7-groove PK
- Regulator: integrated, machine sensed
- Application: Audi A4 A5 Q5 12V 230A, also fits BMW 5, X5
- Net weight: approximately 6.85 kg
- Condition: new, direct replacement for the original unit
The 12V, 220A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The OEM and aftermarket references listed for this alternator are:
- 12317603779
- 12317575347
- 12317575344
- 12314595891
- 12317603782
- 115807
- CAL15440
- CAL15440AS
- 12-31-7-603-782
- 12-31-7-575-344
- CAL15440ES
- 12-31-4-595-890
- 12314595890
- 12-31-4-595-891
- CAL15440OS
- CAL15440RS
Cross references are a guide, not a fitment guarantee. The same engine was often built with more than one alternator, and the pulley type or terminal position can differ between them. This unit is listed with 16 references in total.
Fitment and Application
This alternator family was fitted across a range of Audi applications as engines and electrical loads were revised. The unit here covers the references above and is a direct replacement where those numbers match.
If the number on the old alternator falls outside the list above, send the engine code and a photograph of the rear cover before ordering. A unit with the right housing but a different regulator plug will not connect cleanly.
What Wears Out First
Bearings carry the rotor at engine speed for the life of the vehicle. Once the front bearing dries out, the unit starts to whine, and the noise gets worse with electrical load rather than with engine speed alone.
Oil mist from a leaking cam or crank seal attacks the internal insulation. A unit that is oily on the outside is often already failing inside, even if the output still looks normal on a meter.
What to Look For
- Slow cranking that gets worse each morning
- Dash lights that flicker at idle
- Radio interference or a hum through the speakers
- Alternator hot to the touch after a normal drive
- Charging voltage above 15V, boiling the battery
Measure charging voltage at the battery posts with the engine idling and all accessories off. A healthy unit holds about 13.8 to 14.7V on a 12V system; below 13.2V or above 15V points to the alternator or its regulator rather than the battery.
Pre-Fit Checklist
- Battery condition and earth strap
- Belt condition, alignment and tensioner travel
- Pulley groove count against the original unit
- Regulator plug shape and B+ terminal size
- Charging voltage after fitting, at idle and at 2000 rpm
Most charging comebacks trace back to a battery or belt problem that was already there. Check those two first, then fit the alternator once and correctly.
Fitting Guidance
Disconnect the battery negative terminal first, then release the belt tension and slip the belt off the pulley. Remove the B+ cable and the regulator plug before the mounting bolts.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Hejian Nuojin Auto Parts Co., Ltd. produces starter and alternator components for the aftermarket. Each alternator is tested for output at idle and rated speed, ripple current, regulator voltage and bearing noise before packing.
Common references are held in stock, volume orders ship in around 30 days and every unit carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
What charging voltage should I see?
Around 13.8 to 14.7V at idle on a 12V system, and about 27.5 to 28.5V on a 24V system, measured at the battery posts.

