
Генератор 12V 130A 13905N для Lexus
Применимый тип:Lexus
Номер запчасти:104210-3111 104210-3120 104210-3122 27060-20180 2706020190,270602019084,13905N、301N20620Z13927N A6149,DRA0774,1042103040.1042103041.1042103042 1042103043.1042103110.1042103120,1042103121、 DAN1355,ALN3242AN,ALN3242GB,ALN3242UX,ALN3242ZD ALN3218RB,ALN3242WA,2706020170,270602017084 ALN8242NWV,ALN9242BA,ALN9242BS.、ALN9242GB ALN9242KL,ALN9242LP,ALN9242NW,ALN9242US、ALN9242ZD
| Номинальный выход : | 12V 130A |
| Pulley : | 6pk |
| Размер : | 24*18*17cm single unit inner box |
| Вес : | Вес нетто 5,55 кг, вес брутто 5,85 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | генератор |
| Спецификация : | 12V 130A |
| Блок : | 6PK |
| Марка : | NUO JIN |
| Цифры : | 27060-20180 104210-3111 |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |





Overview of the 13905N Alternator
For Lexus owners chasing a battery light or a slowly flattening battery, the 13905N is a 12V, 130A alternator supplied as a complete unit with its regulator and rectifier already fitted.
An alternator spends its life at engine speed, so bearings, slip rings and diodes wear continuously rather than in bursts. That is why output falls gradually and why the first symptom is often a battery that is flat only after a few days of short trips.
Technical Summary
- Rated voltage: 12V
- Rated output: 130 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: Lexus
- Net weight: approximately 5.55 kg
- Condition: new, direct replacement for the original unit
The 12V, 130A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The OEM and aftermarket references listed for this alternator are:
- 104210-3111
- 104210-3120
- 104210-3122
- 27060-20180
- 270602019084
- 13905N
- 301N20620Z13927N
- A6149
- DRA0774
- 1042103121
- DAN1355
- ALN3242AN
- ALN3242GB
- ALN3242UX
- ALN3242ZD
- ALN3218RB
Several numbers in this list refer to the complete assembly while others cover the bare machine. A photograph of the rear cover protects against the most common ordering error. This unit is listed with 16 references in total.
Where This Alternator Fits
Lexus models in this range share the same mounting bracket and belt layout, which is why one reference serves several years of production. Fitment is decided by the number on the unit, not by the model year alone.
Vehicles that have had an engine or accessory drive belt conversion may already carry a different alternator, so treat the catalogue as a starting point rather than the final answer.
What Wears Out First
Bearings carry the rotor at engine speed for the life of the vehicle. Once the front bearing dries out, the unit starts to whine, and the noise gets worse with electrical load rather than with engine speed alone.
Oil mist from a leaking cam or crank seal attacks the internal insulation. A unit that is oily on the outside is often already failing inside, even if the output still looks normal on a meter.
Fault Symptoms
- Slow cranking that gets worse each morning
- Dash lights that flicker at idle
- Radio interference or a hum through the speakers
- Alternator hot to the touch after a normal drive
- Charging voltage above 15V, boiling the battery
A load test separates a tired alternator from a tired battery. Switch on the lights, blower and rear demister and watch the voltage: a healthy unit holds its output, a worn one sags.
What to Check Before Fitting
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
A new alternator on a tired battery or a glazed belt will not restore charging. Test the simple items before the unit goes on.
Fitting the Replacement
With the battery isolated, relieve the belt tension, disconnect the B+ terminal and unplug the regulator connector, then remove the mounting bolts and lift the unit out.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Hejian Nuojin Auto Parts Co., Ltd. produces starter and alternator components for the aftermarket. Each alternator is tested for output at idle and rated speed, ripple current, regulator voltage and bearing noise before packing.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.
Why does the battery light glow at idle?
Usually a worn regulator, a slipping belt or a diode fault. Check belt tension and charging voltage before replacing the unit.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
Installation Method and Precautions for Lexus 12V 130A Alternator
1. Tool and Consumable Preparation
Special tools: Torque wrench (for alternator fixing bolts and wiring terminals), socket set (10/12/14mm as main specifications), clip remover, wire harness plugging/unplugging tool;
Consumables: Original factory alternator bushings/rubber pads (for shock absorption, replace if aged), high-temperature resistant insulating tape, lock nuts (original factory specification), contact grease (for wiring terminals), engine compartment wire harness fixing clips;
Auxiliary tools: Multimeter (for measuring power generation after installation), cleaning cloth (for cleaning mounting surfaces), cable ties (for organizing wire harnesses).
2. Accessory and Condition Inspection
Confirm the alternator is of 12V 130A original/adapted specification, and verify the part number matches the model (Lexus alternators have different interfaces and fixing positions for different model years/models);
Inspect the alternator appearance: no housing cracks, no loose/abnormal noise in bearings, no oxidation/deformation of wiring terminals, and the pulley rotates smoothly without jamming;
Inspect supporting accessories: no deformation or rust on alternator fixing brackets and adjustment arms, normal elastic force of belt tensioner, and no cracking/aging of drive belt (it is recommended to inspect synchronously and replace if necessary).
3. Pre-vehicle Operation
Turn off the engine, disconnect the negative battery terminal (core step to prevent circuit short circuit during installation), and wrap the negative terminal with insulating tape;
Clean the alternator mounting position in the engine compartment, remove oil, dust and rust, and check that the bolt holes on the mounting surface are not stripped;
Organize the wire harnesses around the alternator, confirm the wire harness clips and fixing points are intact to avoid extrusion and winding of wire harnesses during installation.
II. Standardized Installation Steps
Preliminary positioning of the alternator: Place the alternator into the mounting bracket in the engine compartment, align the fixing holes of the bracket and the alternator, insert one main fixing bolt (do not tighten, leave adjustment margin), ensure there is no hard contact between the alternator housing and the bracket, and the rubber shock-absorbing bushing is accurately embedded in the mounting position (shock absorption and anti-loosening to avoid resonance during alternator operation).
Fix the adjustment arm/tension bracket: Connect the alternator adjustment arm (for adjusting belt tightness) to the fixed point on the engine side, insert the adjustment bolt and screw it gently to ensure the alternator can swing slightly along the adjustment arm, reserving space for subsequent belt tensioning.
Tighten the main fixing bolts: Tighten all main fixing bolts with a torque wrench according to the original factory torque standard (the torque of Lexus alternator main bolts is mostly 28-35N·m, subject to the model maintenance manual). After tightening the bolts, check that the alternator housing has no shaking or displacement, and the bracket is closely attached to the alternator.
Assemble the drive belt: According to the belt routing mark in the engine compartment (refer to the original factory manual if there is no mark), wind the drive belt into the alternator pulley, crankshaft pulley and tensioner pulley in sequence. Ensure the belt is seated in the groove without offset or distortion, and the inner side of the belt is fully attached to the tooth surface of the pulley.
III.Core Precautions (No Unauthorized Operation Allowed)
1. Electrical Safety (Top Priority, Avoid Equipment Damage/Personal Safety)
Disconnect the negative battery terminal first throughout the whole process. Do not install/disconnect the alternator wiring when the battery is powered on, otherwise it will cause circuit short circuit, burnout of the alternator rectifier bridge, and even engine compartment fire;
Do not reverse the field wire and power wire. Reversing the positive and negative poles of a 12V alternator will directly burn out the internal stator, rotor and on-board electrical equipment (e.g., ECU, fuse box);
Do not arbitrarily modify the alternator wire harness after installation, and do not privately install high-power electrical appliances directly connected to the alternator B+ terminal to avoid overloading the alternator due to exceeding the 130A rated output.
2. Installation Technology
All bolts must be tightened according to the original factory torque. Do not tighten with brute force (which may cause bolt stripping and alternator housing cracking). Loose tightening will cause the alternator to shake during operation, wearing bearings and breaking wire harnesses;
The rubber shock-absorbing bushing must be of the original factory specification and replaced immediately if aged/missing. Otherwise, the vibration from alternator operation will be transmitted to the vehicle body, causing abnormal noise and accelerating the wear of internal bearings of the alternator;
The drive belt must be accurately seated in the groove. Do not allow the belt edge to rest on the outside of the pulley, otherwise it will cause rapid wear and falling off of the belt, resulting in alternator failure and battery power loss.
3. Adaptation and Protection
The alternator must be a special adapted model for Lexus vehicles. Even for the same 12V 130A specification, different models have different fixing positions, interfaces and pulley specifications. Mixed use will lead to installation failure or abnormal operation after installation;
The engine compartment is of high temperature and heavy oil pollution. After installation, ensure the wiring terminals and wire harness joints are well insulated and protected to avoid oxidation and poor contact of terminals caused by oil pollution and water vapor;
The alternator bearing is a maintenance-free component. Do not privately disassemble and fill with lubricating oil before installation, otherwise the bearing seal will be damaged, leading to dust and oil leakage and shortening the bearing service life.
References:
I. Core Basis and Source Attribution (Module-by-Module Explanation)
1. Basic Processes and Safety Specifications (General Automotive Industry + Toyota/Lexus Original Factory)
- Procedures such as power-off operation (disconnecting the negative battery terminal first), wiring sequence (connecting the field wire before the B+ power cable), wire harness fixation and insulation protection are derived from the general safety requirements in the Charging System - Alternator Removal and Installation chapter of the Toyota/Lexus Original Factory Service Manual (SM), and are also compliant with the SAE (Society of Automotive Engineers) safety standards for automotive electrical installation.
- The disassembly and installation sequence (Positioning → Fixing → Wiring → Belt Fitting → Reset) is the Standard Operating Procedure (SOP) for alternator removal and installation across all Toyota/Lexus models. This procedure is identical in the service manuals for models including the ES, IS, GS, RX and NX, with only minor differences in the quantity and position of fixing bolts.
2. Torque Parameters (Toyota/Lexus Original Factory Specifications + Industry General Standards)
- Torque values for the main fixing bolts (28–35N·m), adjustment bolts (20–25N·m), B+ terminal nuts (18–22N·m) and negative battery terminal (15–20N·m) are all sourced from the Fastener Torque Specification Table in the Lexus Original Factory Service Manual, applicable to M8/M10 standard bolts for 12V 130A alternators.
- The belt tension requirement (10–15mm deflection) is the standard tension specification for multi-ribbed belts on all Toyota/Lexus engines, and is documented in the Service Specification for Engine Accessory Drive Systems.
3. Power Generation Test Standards (Toyota/Lexus Original Factory Electrical Specifications)
- The standard idle power generation output of 13.8–14.5V and stable output with no significant fluctuations at high engine speeds are directly taken from the Lexus Charging System Inspection and Repair Standards. This range is the rated output of the 12V 130A alternator and serves as the core acceptance criterion for qualified alternator installation at authorized 4S dealerships.
4. Precautions and Prohibitions (Original Factory Maintenance Prohibitions + Industry Fault Case Summaries)
- Mandatory prohibitions including no disassembly/installation with power on, no reverse polarity connection of positive and negative wires, and no unauthorized wiring modification or overloading are derived from the WARNING chapter of the Toyota/Lexus Service Manual, and are mandatory requirements to prevent burnout of the alternator rectifier bridge and vehicle ECU.
- Requirements such as mandatory installation of shock-absorbing bushings, proper belt grooving, and wire harness routing away from rotating/high-temperature components are sourced from Toyota Technical Service Bulletins (TSB) and general industry maintenance experience, designed to prevent common faults such as alternator abnormal noise, wire harness aging and belt detachment.

