
Генератор 12V 120A ALM4091 для MITSUBISHI
Применимый тип:MITSUBISHI
Номер запчасти:92173959 92122243 92122244 92173960 ALM4091 ALM4091MA ALM4091UX,ALM4091RB ALM4091YJ,A003TG3991, A003TG4091, A3TG1491 A3TG1991, A3TG3991, A3TG4091
| Номинальный выход : | 12V 120A |
| Pulley : | 6PK |
| Размер : | 24*18*17single unit inner box |
| Вес : | Вес нетто 5,7 кг, вес брутто 6 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | генератор |
| Спецификация : | 12V 120A |
| Блок : | 6PK |
| Марка : | nuojin |
| Цифры : | 92173959 92122243 |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |





Overview of the ALM4091 Alternator
The ALM4091 is a 12V, 120A alternator for -MITSUBISHI. It is a claw-pole machine with an integrated regulator, balanced at the factory so it runs quietly at idle and at speed.
Charging output depends on rotational speed and on the electrical load. A unit that produces 14.2V at idle with the lights off can still be marginal when the fan, lights and rear demister are all running, which is why a load test matters more than a no-load voltage reading.
Specification Summary
- Rated voltage: 12V
- Rated output: 120 A
- Pulley: 6-groove PK
- Regulator: integrated, machine sensed
- Application: -MITSUBISHI
- Net weight: approximately 5.7 kg
- Condition: new, direct replacement for the original unit
The 12V, 120A rating is the output the unit holds at normal engine speed with the battery in a partially discharged state — the condition that matters in real use, not on a test bench.
Reference Numbers and Cross References
The OEM and aftermarket references listed for this alternator are:
- 92173959
- 92122243
- 92122244
- 92173960
- ALM4091
- ALM4091MA
- ALM4091UX
- ALM4091RB
- ALM4091YJ
- A003TG3991
- A003TG4091
- A3TG1491
- A3TG3991
- A3TG4091
Several numbers in this list refer to the complete assembly while others cover the bare machine. A photograph of the rear cover protects against the most common ordering error. This unit is listed with 14 references in total.
Where This Alternator Fits
This alternator family was fitted across a range of the manufacturer applications as engines and electrical loads were revised. The unit here covers the references above and is a direct replacement where those numbers match.
If the number on the old alternator falls outside the list above, send the engine code and a photograph of the rear cover before ordering. A unit with the right housing but a different regulator plug will not connect cleanly.
Common Failure Modes
The regulator controls field current and therefore output voltage. Its brushes ride on the slip rings, and both wear. A worn regulator shows up as a charging voltage that drifts or flickers with engine speed.
Bearings carry the rotor at engine speed for the life of the vehicle. Once the front bearing dries out, the unit starts to whine, and the noise gets worse with electrical load rather than with engine speed alone.
Fault Symptoms
- Battery light on with the engine running
- Dim or pulsing interior lights
- Voltage at the battery below 13.5V with the engine idling
- Belt squeal that appears when a heavy load switches on
- Overheating alternator body after a short run
Measure charging voltage at the battery posts with the engine idling and all accessories off. A healthy unit holds about 13.8 to 14.7V on a 12V system; below 13.2V or above 15V points to the alternator or its regulator rather than the battery.
Pre-Fit Checklist
- Battery state of charge and age
- Condition of the B+ cable and its fuse
- Pulley type: solid, clutch or overrunning
- Mounting ear dimensions against the bracket
- Belt routing after the new unit is fitted
Most charging comebacks trace back to a battery or belt problem that was already there. Check those two first, then fit the alternator once and correctly.
Installation Notes
Disconnect the battery negative terminal first, then release the belt tension and slip the belt off the pulley. Remove the B+ cable and the regulator plug before the mounting bolts.
Fit the replacement, reconnect the plug and B+ cable, then refit the belt and set tension to specification. Start the engine and confirm charging voltage at idle before the first drive.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Every batch is inspected for housing dimensions, pulley alignment and terminal integrity, and each unit is bench tested for output, ripple and regulator cut-in before it is boxed in neutral cartons with foam protection.
Standard references are kept as spot goods, volume orders are delivered in around 30 days and each alternator carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does the alternator come with a pulley?
Yes, the unit is supplied with its pulley fitted as shown in the photographs, so the original belt can be reused.
Can I replace the regulator only?
Yes, when the bearings and diodes are sound. On a high-mileage unit the complete alternator is usually better value.
Can a bad alternator damage the battery?
Overcharging or heavy ripple will shorten battery life, and a deeply discharged battery can fail. Replace the alternator before the battery if voltage is out of range.
What charging voltage should I see?
Around 13.8 to 14.7V at idle on a 12V system, and about 27.5 to 28.5V on a 24V system, measured at the battery posts.
1. Core Electrical Parameters
2. Compatible Vehicles & Engine
3. Product Features
OEM Quality: Genuine GM original part, perfectly matching original factory specifications.
High Efficiency & Stable Performance: 120A high output to meet full vehicle electrical and charging demands.
Durable & Reliable: Brand-new internal components including coil, bearing and rectifier bridge, designed for long service life.
Direct Fit Replacement: Mounting points and plug interface (3/4 o’clock position) are identical to the original, plug-and-play installation.
Warranty: 12 months / Unlimited mileage warranty.

