
Стартер 12V 1.2KW 10T 4801850AA для Jeep Wrangler 3.8L и Dodge Grand Caravan V6.
Применимый тип:Jeep Wrangler 3.8L (2006–2010) и Dodge Grand Caravan V6.
Номер запчасти:4801850AA, 428000-3071, 428000-6640, 04748046AA, 04748046AB, 4280003070, 4280003071, 4280003072, 4280006641, 17949, ZWS11400231013W.
| Мощность л.с. : | 12v 1.2KW |
| Число футов : | 10T |
| Размер : | 24*18*17single unit inner box |
| Вес : | Вес нетто 3,1 кг, вес брутто 3,25 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | стартер |
| Спецификация : | 12v 1.2KW |
| Число футов : | 10T |
| Марка : | nuojin |
| Цифры : | 4801850AA 04748046AA |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |






Overview of the 4801850AA Starter Motor
The 4801850AA is a 12V, 1.2 kW starter motor supplied for Jeep Wrangler 3.8L and Dodge Grand Caravan V6.. A reduction gearset between motor and pinion keeps the body compact while still delivering the cranking torque the engine needs.
Every unit is bench tested at the factory for current draw, solenoid pull-in and pinion throw, because those three values decide whether a starter works in a cold engine bay as well as it does on a test bench.
Specification Summary
- Rated voltage: 12V
- Rated output: 1.2 kW
- Pinion: 10 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Jeep Wrangler 3.8L and Dodge Grand Caravan V6.
- Net weight: approximately 3.25 kg
- Condition: new, direct replacement for the original unit
A 12V 1.2 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
The reduction gearset lets the motor run at high speed while the pinion turns slowly with high torque, which is why the unit stays compact enough for a crowded engine bay.
Reference Numbers and Cross References
The reference family for this starter covers the numbers listed here:
- 4801850AA
- 428000-3071
- 04748046AA
- 428000-6640
- 04748046AB
- 4280003070
- 4280003071
- 4280003072
- 4280006641
- ZWS11400231013W
Starter suppliers revised this design more than once during production. Confirm the number on the old unit, or send a photograph of the drive end, before committing to an order. This starter is listed with 10 references in total.
Fitment and Application
Jeep Wrangler 3.8L and Dodge Grand Caravan V6. applications in this range share the same mounting pattern and terminal layout, which is why one reference can serve several model years. Fitment is still decided by the starter number rather than by the badge on the vehicle. Owners of Jeep Wrangler 3.8L and Dodge Grand Caravan V6. should treat the 4801850AA reference list as a starting point, not the final answer.
If the number on the old unit falls outside the list above, send the engine code and a photograph of the drive end before ordering. A starter with the correct housing but the wrong pinion will grind on the first attempt and can chip the ring gear.
Why These Starters Fail
The brush plate is the second common failure point. Brushes shorten gradually, spring pressure falls, and contact becomes intermittent. Cranking speed drops a little every week until the engine refuses to start on a cold morning.
Most failures start at the solenoid contact. Each start switches the full cranking current through a copper disc, and after thousands of cycles that disc pits and burns. The result is the familiar single click with no rotation, or a delay before the motor turns. The 4801850AA is built to the same flange pattern as the unit it replaces.
Fault Symptoms
- Cranking that sounds normal but takes longer than it used to
- Several attempts needed before the motor engages
- Black carbon dust inside the drive end housing
- Voltage dip that dims the lights during cranking
- Starter that responds to a tap on the housing but not to the key alone
Before replacing the starter, check the battery state of charge, the terminal clamps, the engine earth strap and the main cable. On vehicles of this age a corroded earth connection produces exactly the same slow-crank symptom and costs far less to correct. The 4801850AA ships with its solenoid fitted, so no parts have to be transferred from the old unit.
What to Check Before Fitting
- Battery capacity under load, not just open-circuit voltage
- Terminal clamps and the main cable lug for corrosion or heat marks
- Earth strap between engine and chassis
- Ring gear teeth, visible through the starter aperture
- Key switch and signal wire voltage at the solenoid terminal
Fitting a new starter onto a worn ring gear or a marginal battery shortens its life. Check the simple items first, then fit the unit once and correctly.
Installation Notes
Disconnect the battery negative terminal, remove the intake parts that restrict access, then disconnect the main cable and the solenoid signal connector. Support the starter before removing the mounting bolts.
Clean the mounting face and inspect the ring gear teeth through the starter aperture. Fit the replacement with the original bolts, reconnect the cables in the same order and tighten the main terminal firmly. Crank the engine briefly and listen for clean engagement and release. For the 4801850AA, the practical check is the number stamped on the housing.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Each production batch is inspected for housing dimensions, terminal integrity and pinion fit, and every starter is bench tested before it is boxed. Units ship in neutral cartons with foam protection, which keeps freight damage low and allows distributors to label stock under their own brand.
Standard references are held as spot goods, volume orders are delivered in around 30 days, and every unit carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Can I test the starter on the bench?
Yes. Apply battery voltage to the main stud and the signal terminal and check that the pinion throws and the motor turns. A clamp meter reading against the rated current will show whether the unit is drawing too much.
Does the starter need any maintenance?
No routine maintenance is required. Keeping the battery, terminals and earth connections clean is what extends starter life in practice.
Why does the starter work cold but fail when hot?
Heat raises solenoid resistance and reduces brush spring pressure. Both effects build up gradually and appear first on a hot restart.
Can the solenoid be replaced on its own?
It is possible, provided the motor draws normal current and the pinion is sound. Where the brushes are already short, replacing the complete starter avoids a second repair within a year.

