
Стартер 24V 6.5KW 10T QDJ277 для Dongfeng Cummins 6BT
Применимый тип:Dongfeng Cummins 6BT
Номер запчасти: 3354458 3675204 3909914 QDJ277 4935789 6BT5.9 3354458 3675204 3909914 3918377 3926932 3926932 3604677 3909914 3918377
| Мощность л.с. : | 24V 6.5KW |
| Число футов : | 10T |
| Размер : | |
| Вес : | Вес нетто 8,75 кг |
| Упаковочные материалы : | Neutral packaging |
| Спотовые / предварительные продажи : | Presale |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | стартер |
| Спецификация : | 24V 6.5KW |
| Число футов : | 10T |
| Марка : | NUOJIN |
| Цифры : | 3354458 3675204 3909914 |
| Качество : | восстановленный |
| Время поставки : | 30 дней |







Overview of the QDJ277 Starter Motor
Dongfeng Cummins 6BT owners replacing a tired starter will find the QDJ277 a direct fit: a 24V, 6.5 kW reduction-gear unit with a pre-engaged solenoid, produced to the original flange and terminal layout.
The starter carries the full cranking current through its brushes and solenoid contact, so every start costs a little material. That is why the unit is normally replaced once, at the end of a long service life, rather than repaired repeatedly.
Technical Summary
- Rated voltage: 24V
- Rated output: 6.5 kW
- Pinion: 10 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Dongfeng Cummins 6BT
- Net weight: approximately 8.75 kg
- Condition: new, direct replacement for the original unit
A 24V 6.5 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
A pre-engaged solenoid pushes the pinion into mesh before the main contact closes, which prevents the tooth damage that occurs when a motor spins up against a stationary ring gear.
Reference Numbers and Cross References
The starter is supplied against the following references, which help identify it against the unit already fitted to the vehicle:
- 3354458
- 3675204
- 3909914
- QDJ277
- 4935789
- 6BT5.9
- 3918377
- 3926932
- 3604677
Starter suppliers revised this design more than once during production. Confirm the number on the old unit, or send a photograph of the drive end, before committing to an order. This starter is listed with 9 references in total.
Matching the Unit to the Vehicle
The unit is listed for Dongfeng Cummins 6BT. Because manufacturers changed starter suppliers during the production run, the safest check is the number stamped on the starter body, not the model year alone. Owners of Dongfeng Cummins 6BT should treat the QDJ277 reference list as a starting point, not the final answer.
A mismatched pinion is the most common cause of a starter that engages noisily or refuses to mesh. Compare the tooth count before fitting, not after.
Why These Starters Fail
The brush plate is the second common failure point. Brushes shorten gradually, spring pressure falls, and contact becomes intermittent. Cranking speed drops a little every week until the engine refuses to start on a cold morning.
Oil or coolant mist from a leaking seal finds its way into the drive end housing, mixes with carbon dust and forms a conductive paste. The starter then arcs internally and fails early, whatever its mileage. Where a QDJ277 has been replaced before, check that the fitted unit still matches the reference list.
Symptoms of a Failing Starter
- A single heavy click, then nothing
- Slow, laboured cranking from cold that improves once the engine runs
- Metallic scrape or whine during cranking
- Starter that disengages late, with a brief screech after the engine fires
- Burning smell near the starter after a failed start attempt
A cranking voltage test separates the starter from the rest of the circuit. If battery voltage stays healthy at the terminals but drops sharply at the starter stud, the cable or the connection is at fault rather than the motor. The QDJ277 ships with its solenoid fitted, so no parts have to be transferred from the old unit.
Checks Before Installation
- State of charge and age of the battery
- Corrosion on the earth strap and the engine-to-body bond
- Pinion tooth count against the ring gear
- Free movement of the new pinion before fitting
- That the signal wire connector seats fully on the solenoid
Fitting a new starter onto a worn ring gear or a marginal battery shortens its life. Check the simple items first, then fit the unit once and correctly.
Installation Notes
Disconnect the battery negative terminal, remove the intake parts that restrict access, then disconnect the main cable and the solenoid signal connector. Support the starter before removing the mounting bolts.
Clean the mounting face and inspect the ring gear teeth through the starter aperture. Fit the replacement with the original bolts, reconnect the cables in the same order and tighten the main terminal firmly. Crank the engine briefly and listen for clean engagement and release. Owners of Dongfeng Cummins 6BT should treat the QDJ277 reference list as a starting point, not the final answer.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Hejian Nuojin Auto Parts Co., Ltd. manufactures starter and alternator components for the aftermarket. Every unit is bench tested for no-load current draw, solenoid pull-in and release voltage, pinion throw and running noise before packing.
Standard references are held as spot goods, volume orders are delivered in around 30 days, and every unit carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does this starter come with the solenoid?
The starter is supplied as a complete assembly including the solenoid. Reuse the original mounting bolts if they are in good condition.
Does the starter need any maintenance?
No routine maintenance is required. Keeping the battery, terminals and earth connections clean is what extends starter life in practice.
Is a 12V and a 24V starter interchangeable?
No. The voltage rating must match the vehicle system; fitting the wrong unit will damage the starter and the wiring.
Can the solenoid be replaced on its own?
It is possible, provided the motor draws normal current and the pinion is sound. Where the brushes are already short, replacing the complete starter avoids a second repair within a year.

