
Стартер 12V 1.4KW 12T SHI0161 для Polaris Sportsman 850 ATV EPS, Forest, X2 XP EPS and
Применимый тип:For Polaris Sportsman 850 ATV EPS, Forest, X2 XP EPS и Touring.
Номер запчасти:4011979-479, 4011979, 4012855-479, 4014946-479, SHI0161, 410-4407, 115450, S02235, S114824, S114939, STH4939BA, STH4939YN, STH4939ZL, 4011979479, 4011979897, 4012855479, 4014946479, 4016293, 19622N, 23169HI.
| Мощность л.с. : | 12V 1.4KW |
| Число футов : | 12T |
| Размер : | 24*18*17single unit inner box |
| Вес : | Вес нетто 2,9 кг, вес брутто 3 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | стартер |
| Спецификация : | 12V 1.4KW |
| Число футов : | 12T |
| Марка : | nuojin |
| Цифры : | 4011979-479 |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |





Overview of the SHI0161 Starter Motor
This SHI0161 starter motor is the 12V, 1.4 kW replacement for Polaris Sportsman 850 ATV EPS, Forest, X2 XP EPS and applications. The housing, drive end and terminal positions follow the original design, so the unit bolts straight onto the bell housing and reuses the existing cabling.
Cranking load varies with temperature, battery condition and engine condition. A healthy starter has margin for all three; a worn one turns the engine just slowly enough that the control unit hesitates and the driver notices long, laboured starts.
Technical Summary
- Rated voltage: 12V
- Rated output: 1.4 kW
- Pinion: 12 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Polaris Sportsman 850 ATV EPS, Forest, X2 XP EPS and
- Net weight: approximately 3 kg
- Condition: new, direct replacement for the original unit
A 12V 1.4 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
The reduction gearset lets the motor run at high speed while the pinion turns slowly with high torque, which is why the unit stays compact enough for a crowded engine bay.
Reference Numbers and Cross References
The reference family for this starter covers the numbers listed here:
- 4011979-479
- 4012855-479
- 4014946-479
- SHI0161
- 410-4407
- 115450
- S02235
- S114824
- S114939
- STH4939BA
- STH4939YN
- STH4939ZL
- 4012855479
- 4014946479
- 4016293
- 23169HI
Starter suppliers revised this design more than once during production. Confirm the number on the old unit, or send a photograph of the drive end, before committing to an order. This starter is listed with 16 references in total.
Application Notes
This starter family was fitted to a range of Polaris applications, and the part number changed as engines and flywheels were revised. The unit listed here covers the references above and is a direct replacement where those numbers match. On Polaris Sportsman 850 ATV EPS, Forest, X2 XP EPS and installations, access to the SHI0161 usually decides how long the job takes.
Vehicles that have had an engine or gearbox replacement may already carry a different starter from the one the catalogue expects, so treat the paperwork as a starting point rather than the final answer.
Common Failure Patterns
Most failures start at the solenoid contact. Each start switches the full cranking current through a copper disc, and after thousands of cycles that disc pits and burns. The result is the familiar single click with no rotation, or a delay before the motor turns.
The brush plate is the second common failure point. Brushes shorten gradually, spring pressure falls, and contact becomes intermittent. Cranking speed drops a little every week until the engine refuses to start on a cold morning. Where a SHI0161 has been replaced before, check that the fitted unit still matches the reference list.
Diagnostic Signs
- A single heavy click, then nothing
- Slow, laboured cranking from cold that improves once the engine runs
- Metallic scrape or whine during cranking
- Starter that disengages late, with a brief screech after the engine fires
- Burning smell near the starter after a failed start attempt
On a high-mileage vehicle, worn brushes and a burnt solenoid contact usually arrive together. If the motor bench tests well but cranking is still weak in the car, inspect the main cable and earth path before fitting another starter. Fitting the SHI0161 correctly takes less time than diagnosing the original fault.
Pre-Fit Checklist
- Condition of the old pinion and ring gear before the new unit goes in
- Main cable continuity and the condition of the lug at the starter stud
- Battery voltage while cranking, measured at the battery posts
- Mounting face cleanliness and bolt condition
- That the replacement terminal layout matches the original harness
Most comebacks after a starter replacement trace back to something that was not checked before the unit went on: a tired battery, a corroded earth or a chipped ring gear. Ten minutes with a multimeter and a torch prevents the second repair.
Fitting the Replacement
Raise and support the vehicle where the starter is reached from below, disconnect the battery, and detach the main cable and signal wire. Note the cable positions before removal so the replacement goes back the same way.
Clean the mounting face and inspect the ring gear teeth through the starter aperture. Fit the replacement with the original bolts, reconnect the cables in the same order and tighten the main terminal firmly. Crank the engine briefly and listen for clean engagement and release. For the SHI0161, the practical check is the number stamped on the housing.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Each production batch is inspected for housing dimensions, terminal integrity and pinion fit, and every starter is bench tested before it is boxed. Units ship in neutral cartons with foam protection, which keeps freight damage low and allows distributors to label stock under their own brand.
Common references are kept in stock for fast dispatch, volume orders are delivered in around 30 days and each starter carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does the starter need any maintenance?
No routine maintenance is required. Keeping the battery, terminals and earth connections clean is what extends starter life in practice.
Why does the starter click but not turn?
Most often the battery is low, a terminal is corroded or the solenoid contact is burnt. Measure battery voltage while the key is turned; a healthy battery that still gives only a click points to the solenoid.
Can the solenoid be replaced on its own?
It is possible, provided the motor draws normal current and the pinion is sound. Where the brushes are already short, replacing the complete starter avoids a second repair within a year.
Why does the starter work cold but fail when hot?
Heat raises solenoid resistance and reduces brush spring pressure. Both effects build up gradually and appear first on a hot restart.

