
Стартер 12V 3KW 11T STN2868 для Cummins QSB 3.3L двигатели и JLG aerial work platform
Применимый тип:For Cummins QSB 3.3L двигатели и JLG aerial work platform equipment.
Номер запчасти:5256155, 428000-6800, 4280006800, 4280006801, 4280006802, 42800068021, 31791096, 70024277, STN2868, 10955, 10955N, 4BT3.3.
| Мощность л.с. : | 3KW 12V |
| Число футов : | 11T |
| Размер : | 44*24*19 cm single unit inner box |
| Вес : | Вес нетто 7,3 кг, вес брутто 7,9 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | стартер |
| Спецификация : | 3KW 12V |
| Число футов : | 11T |
| Марка : | NUOJIN |
| Цифры : | 5256155, 4280006800, |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |





Overview of the STN2868 Starter Motor
The STN2868 starter motor is a 12V, 3 kW unit built for Cummins QSB 3.3L engines and JLG aerial work platform. It is a reduction-gear starter with a pre-engaged solenoid, assembled to the original mounting flange and terminal positions so it fits without adapters or wiring changes.
The starter carries the full cranking current through its brushes and solenoid contact, so every start costs a little material. That is why the unit is normally replaced once, at the end of a long service life, rather than repaired repeatedly.
Key Specifications
- Rated voltage: 12V
- Rated output: 3 kW
- Pinion: 11 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Cummins QSB 3.3L engines and JLG aerial work platform
- Net weight: approximately 7.9 kg
- Condition: new, direct replacement for the original unit
A 12V 3 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
The drive end housing is cast aluminium and carries the pinion bearing, so the pinion stays square to the ring gear when the motor delivers full torque.
Reference Numbers and Cross References
The reference family for this starter covers the numbers listed here:
- 4280006800
- 4280006801
- 5256155
- 428000-6800
- 4280006802
- 42800068021
- 31791096
- 70024277
- STN2868
- 10955N
- 4BT3.3
Where the label on the old starter has corroded, compare the pinion teeth, the mounting flange and the terminal bracket with the photographs before ordering. The number on the original unit is the reliable identifier. This starter is listed with 11 references in total.
Application Notes
The unit is listed for Cummins QSB 3.3L engines and JLG aerial work platform. Because manufacturers changed starter suppliers during the production run, the safest check is the number stamped on the starter body, not the model year alone. Owners of Cummins QSB 3.3L engines and JLG aerial work platform should treat the STN2868 reference list as a starting point, not the final answer.
Vehicles that have had an engine or gearbox replacement may already carry a different starter from the one the catalogue expects, so treat the paperwork as a starting point rather than the final answer.
Failure Causes
Heat is the underlying cause in most cases. The starter sits close to the exhaust, and after a hot shutdown the solenoid winding and brush plate soak in heat with no airflow. Resin hardens, springs lose tension and the contact oxidises.
Oil or coolant mist from a leaking seal finds its way into the drive end housing, mixes with carbon dust and forms a conductive paste. The starter then arcs internally and fails early, whatever its mileage. The STN2868 ships with its solenoid fitted, so no parts have to be transferred from the old unit.
Symptoms of a Failing Starter
- Click from the solenoid with no rotation, sometimes clearing on a second attempt
- Cranking that has become slower over several weeks
- Grinding as the pinion meets the ring gear
- Starter that keeps running after the key is released
- Intermittent no-crank that appears when the engine bay is hot
Before replacing the starter, check the battery state of charge, the terminal clamps, the engine earth strap and the main cable. On vehicles of this age a corroded earth connection produces exactly the same slow-crank symptom and costs far less to correct. The STN2868 ships with its solenoid fitted, so no parts have to be transferred from the old unit.
Pre-Fit Checklist
- State of charge and age of the battery
- Corrosion on the earth strap and the engine-to-body bond
- Pinion tooth count against the ring gear
- Free movement of the new pinion before fitting
- That the signal wire connector seats fully on the solenoid
Most comebacks after a starter replacement trace back to something that was not checked before the unit went on: a tired battery, a corroded earth or a chipped ring gear. Ten minutes with a multimeter and a torch prevents the second repair.
Installation Procedure
Isolate the battery, mark the terminal positions, then disconnect the main cable and the signal wire. Clean around the mounting flange before the starter is withdrawn so dirt does not fall into the bell housing.
Check the ring gear through the aperture before fitting. Install the new unit with the original bolts, reconnect the cables in the same order and tighten the main terminal without over-stressing the stud. Crank briefly and confirm the pinion releases as the engine fires. The STN2868 is built to the same flange pattern as the unit it replaces.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Each production batch is inspected for housing dimensions, terminal integrity and pinion fit, and every starter is bench tested before it is boxed. Units ship in neutral cartons with foam protection, which keeps freight damage low and allows distributors to label stock under their own brand.
Common references are kept in stock for fast dispatch, volume orders are delivered in around 30 days and each starter carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Why does the starter click but not turn?
Most often the battery is low, a terminal is corroded or the solenoid contact is burnt. Measure battery voltage while the key is turned; a healthy battery that still gives only a click points to the solenoid.
Does this starter come with the solenoid?
The starter is supplied as a complete assembly including the solenoid. Reuse the original mounting bolts if they are in good condition.
How do I confirm the starter matches my vehicle?
Compare the original part number first, then check the pinion tooth count and the terminal connector layout. The vehicle model alone is not enough, because more than one starter was fitted during production.
Can I test the starter on the bench?
Yes. Apply battery voltage to the main stud and the signal terminal and check that the pinion throws and the motor turns. A clamp meter reading against the rated current will show whether the unit is drawing too much.

