
Стартер 12V 2.7KW 11T MT71FA для Lamborghini,Huerlimann
Применимый тип:Lamborghini,Huerlimann
Номер запчасти:9142602 296190800 63217138 207020002 296190800 63217138 0001314011 0001354090 0001362022 0001362035 63217138 MT71FA 1530359C1 12153835 296190800 LRS00933 LRS02050 LRS2050 LRS933 51262017011 605720100063 0001362009 0001354014 0001354033 0001362022 0001362035 111284 11130083 11130253 11130521 12153835 207020002 063207138010 0001354090 21777102 251443
| Мощность л.с. : | 12V 2.7KW |
| Число футов : | 11T |
| Размер : | 25*16*16 cm single unit inner box |
| Вес : | Вес нетто 5,8 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | стартер |
| Спецификация : | 12V 2.7KW |
| Число футов : | 11T |
| Марка : | nuojin |
| Цифры : | 9142602 296190800 |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |





Overview of the MT71FA Starter Motor
The MT71FA starter motor is a 12V, 2.7 kW unit built for Lamborghini,Huerlimann. It is a reduction-gear starter with a pre-engaged solenoid, assembled to the original mounting flange and terminal positions so it fits without adapters or wiring changes.
Every unit is bench tested at the factory for current draw, solenoid pull-in and pinion throw, because those three values decide whether a starter works in a cold engine bay as well as it does on a test bench.
Technical Summary
- Rated voltage: 12V
- Rated output: 2.7 kW
- Pinion: 11 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Lamborghini,Huerlimann
- Net weight: approximately 5.8 kg
- Condition: new, direct replacement for the original unit
A 12V 2.7 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
The reduction gearset lets the motor run at high speed while the pinion turns slowly with high torque, which is why the unit stays compact enough for a crowded engine bay.
Reference Numbers and Cross References
Cross references for this starter are listed below. They are a matching aid rather than a substitute for checking the number on the old unit:
- 9142602
- 63217138
- 0001314011
- 0001354090
- MT71FA
- 1530359C1
- 12153835
- LRS00933
- LRS933
- 51262017011
- 605720100063
- 0001354014
- 0001354033
- 111284
- 11130083
- 11130253
Cross references are a guide, not a fitment guarantee. The same engine family was often built with more than one starter, and the pinion module or terminal bracket can differ between them, so confirm the number on the unit being replaced. This starter is listed with 16 references in total.
Fitment and Application
This starter is used across Lamborghini,Huerlimann variants that share the same bell housing pattern. Where the original label is missing, the pinion tooth count and terminal position are enough to identify the correct unit. Fitting the MT71FA correctly takes less time than diagnosing the original fault.
If the number on the old unit falls outside the list above, send the engine code and a photograph of the drive end before ordering. A starter with the correct housing but the wrong pinion will grind on the first attempt and can chip the ring gear.
Why These Starters Fail
The brush plate is the second common failure point. Brushes shorten gradually, spring pressure falls, and contact becomes intermittent. Cranking speed drops a little every week until the engine refuses to start on a cold morning.
Most failures start at the solenoid contact. Each start switches the full cranking current through a copper disc, and after thousands of cycles that disc pits and burns. The result is the familiar single click with no rotation, or a delay before the motor turns. This applies in particular to the MT71FA supplied for Lamborghini,Huerlimann.
Symptoms of a Failing Starter
- Click from the solenoid with no rotation, sometimes clearing on a second attempt
- Cranking that has become slower over several weeks
- Grinding as the pinion meets the ring gear
- Starter that keeps running after the key is released
- Intermittent no-crank that appears when the engine bay is hot
On a high-mileage vehicle, worn brushes and a burnt solenoid contact usually arrive together. If the motor bench tests well but cranking is still weak in the car, inspect the main cable and earth path before fitting another starter. Where a MT71FA has been replaced before, check that the fitted unit still matches the reference list.
Before You Fit the Replacement
- Condition of the old pinion and ring gear before the new unit goes in
- Main cable continuity and the condition of the lug at the starter stud
- Battery voltage while cranking, measured at the battery posts
- Mounting face cleanliness and bolt condition
- That the replacement terminal layout matches the original harness
Most comebacks after a starter replacement trace back to something that was not checked before the unit went on: a tired battery, a corroded earth or a chipped ring gear. Ten minutes with a multimeter and a torch prevents the second repair.
Installation Notes
Isolate the battery, mark the terminal positions, then disconnect the main cable and the signal wire. Clean around the mounting flange before the starter is withdrawn so dirt does not fall into the bell housing.
Inspect the ring gear teeth and the mounting face, then fit the replacement and torque the bolts evenly. Reconnect the main cable and signal wire, crank the engine for a moment and listen for clean engagement without a screech or grind. This applies in particular to the MT71FA supplied for Lamborghini,Huerlimann.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Hejian Nuojin Auto Parts Co., Ltd. manufactures starter and alternator components for the aftermarket. Every unit is bench tested for no-load current draw, solenoid pull-in and release voltage, pinion throw and running noise before packing.
Common references are kept in stock for fast dispatch, volume orders are delivered in around 30 days and each starter carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
How do I confirm the starter matches my vehicle?
Compare the original part number first, then check the pinion tooth count and the terminal connector layout. The vehicle model alone is not enough, because more than one starter was fitted during production.
Is a 12V and a 24V starter interchangeable?
No. The voltage rating must match the vehicle system; fitting the wrong unit will damage the starter and the wiring.
Why does the starter work cold but fail when hot?
Heat raises solenoid resistance and reduces brush spring pressure. Both effects build up gradually and appear first on a hot restart.
Why does the starter click but not turn?
Most often the battery is low, a terminal is corroded or the solenoid contact is burnt. Measure battery voltage while the key is turned; a healthy battery that still gives only a click points to the solenoid.
Applicable Models
| Model | Year | Engine | Displacement | Power | Type |
|---|---|---|---|---|---|
| Maserati (Import) GHIBLI 4.7 | 1967-1973 | 107/47 | 4719 | 228 | Coupe |
| Maserati (Import) GHIBLI Spider 4.7 | 1968-1973 | 1073052 | 4719 | 228 | Convertible |
| Maserati (Import) INDY 4.7 | 1972-1974 | 1073052 | 4710 | 213 | Coupe |
| Maserati (Import) INDY 4.9 | 1972-1974 | 1073053 | 4930 | 235 | Coupe |
| Maserati (Import) MEXICO 4.7 | 1967-1972 | 1073052 | 4710 | 213 | Coupe |

