
Стартер 12V 3.0KW 9T S013-007 для Vetus Marine, Deutz, FENDT
Применимый тип:Vetus Marine/Deutz/FENDT
Номер запчасти: 0001230006 0001230014 0001262001 0001262002 0118-0928 0001262034 1183712 05719269 12417754661 12417754662 0001230006 2913108700 2913175400 2913198900 05712909 1853162 S013-007 01182761, 01182925, 01182974, 01183120 12417754661, 12417754662 05712909, 05719269 01183235, 01183237, 01183679, 01183712, 182233, 1183225, 1183235, 1183677 0001230006 0001262002, 0001262034, 0986019020 CST10230AS, CST10361GS 112071, 116093 0001230006, 0001230014, 0001262001, 10461467, 10465055, 10465315, 10465319 10479620, 11132286, 1113286, 19083026 01180928, 01180928KZ, 01181976, 01182233 DRS9020 01182233KZ 12153841
| Мощность л.с. : | 12V 3.0KW |
| Число футов : | 9T |
| Размер : | 24*12*16single unit inner box |
| Вес : | Вес нетто 7,65 кг |
| Упаковочные материалы : | Нейтральная упаковка из крафт-бумаги |
| Спотовые / предварительные продажи : | В наличии |
| Гарантия : | 1 год |
| Номер продукта : |
| Тип : | стартер |
| Спецификация : | 12V 3.0KW |
| Число футов : | 9T |
| Марка : | nuojin |
| Цифры : | 1853162 |
| Качество : | НОВЫЙ |
| Время поставки : | 10 дней |





Overview of the S013-007 Starter Motor
Vetus Marine, Deutz, FENDT owners replacing a tired starter will find the S013-007 a direct fit: a 12V, 3.0 kW reduction-gear unit with a pre-engaged solenoid, produced to the original flange and terminal layout.
The starter carries the full cranking current through its brushes and solenoid contact, so every start costs a little material. That is why the unit is normally replaced once, at the end of a long service life, rather than repaired repeatedly.
Specifications at a Glance
- Rated voltage: 12V
- Rated output: 3.0 kW
- Pinion: 9 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Vetus Marine, Deutz, FENDT
- Net weight: approximately 16.2 kg
- Condition: new, direct replacement for the original unit
A 12V 3.0 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
A pre-engaged solenoid pushes the pinion into mesh before the main contact closes, which prevents the tooth damage that occurs when a motor spins up against a stationary ring gear.
Reference Numbers and Cross References
The reference family for this starter covers the numbers listed here:
- 0001230006
- 0001230014
- 0118-0928
- 1183712
- 12417754661
- 12417754662
- 2913108700
- 2913175400
- 05712909
- 1853162
- S013-007
- 01182761
- 01182925
- 01182974
- 01183120
- 01183235
Where the label on the old starter has corroded, compare the pinion teeth, the mounting flange and the terminal bracket with the photographs before ordering. The number on the original unit is the reliable identifier. This starter is listed with 16 references in total.
Application Notes
This starter is used across Vetus Marine, Deutz, FENDT variants that share the same bell housing pattern. Where the original label is missing, the pinion tooth count and terminal position are enough to identify the correct unit. This applies in particular to the S013-007 supplied for Vetus Marine, Deutz, FENDT.
Vehicles that have had an engine or gearbox replacement may already carry a different starter from the one the catalogue expects, so treat the paperwork as a starting point rather than the final answer.
Common Failure Patterns
Most failures start at the solenoid contact. Each start switches the full cranking current through a copper disc, and after thousands of cycles that disc pits and burns. The result is the familiar single click with no rotation, or a delay before the motor turns.
Heat is the underlying cause in most cases. The starter sits close to the exhaust, and after a hot shutdown the solenoid winding and brush plate soak in heat with no airflow. Resin hardens, springs lose tension and the contact oxidises. The S013-007 ships with its solenoid fitted, so no parts have to be transferred from the old unit.
Symptoms of a Failing Starter
- A single heavy click, then nothing
- Slow, laboured cranking from cold that improves once the engine runs
- Metallic scrape or whine during cranking
- Starter that disengages late, with a brief screech after the engine fires
- Burning smell near the starter after a failed start attempt
A cranking voltage test separates the starter from the rest of the circuit. If battery voltage stays healthy at the terminals but drops sharply at the starter stud, the cable or the connection is at fault rather than the motor. On Vetus Marine, Deutz, FENDT installations, access to the S013-007 usually decides how long the job takes.
Pre-Fit Checklist
- Battery capacity under load, not just open-circuit voltage
- Terminal clamps and the main cable lug for corrosion or heat marks
- Earth strap between engine and chassis
- Ring gear teeth, visible through the starter aperture
- Key switch and signal wire voltage at the solenoid terminal
Fitting a new starter onto a worn ring gear or a marginal battery shortens its life. Check the simple items first, then fit the unit once and correctly.
Fitting Guidance
With the battery isolated, remove any heat shield or ducting that blocks access and disconnect the main cable and solenoid connector. Support the unit before the mounting bolts come out; these starters are heavy enough to damage surrounding parts if they drop.
Check the ring gear through the aperture before fitting. Install the new unit with the original bolts, reconnect the cables in the same order and tighten the main terminal without over-stressing the stud. Crank briefly and confirm the pinion releases as the engine fires. Owners of Vetus Marine, Deutz, FENDT should treat the S013-007 reference list as a starting point, not the final answer.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Each production batch is inspected for housing dimensions, terminal integrity and pinion fit, and every starter is bench tested before it is boxed. Units ship in neutral cartons with foam protection, which keeps freight damage low and allows distributors to label stock under their own brand.
Standard references are held as spot goods, volume orders are delivered in around 30 days, and every unit carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does this starter come with the solenoid?
Yes. The unit is supplied complete with its solenoid, as shown in the product photographs. Mounting bolts are not included.
Is a 12V and a 24V starter interchangeable?
No. The voltage rating must match the vehicle system; fitting the wrong unit will damage the starter and the wiring.
Should the ring gear be replaced at the same time?
Inspect it, but replace it only when the teeth show damage. A worn ring gear will damage a new pinion within a few starts.
Can I test the starter on the bench?
Yes. Apply battery voltage to the main stud and the signal terminal and check that the pinion throws and the motor turns. A clamp meter reading against the rated current will show whether the unit is drawing too much.
Equipment Model & Engine Compatibility Table
| Brand | Model | Engine Code | Production Year |
|---|---|---|---|
| DEUTZ-FAHR | Agrotron TTV1160TT | BF6L1013E | 2001–2003 |
| DEUTZ-FAHR | Agrotron TTV610 | TCD2013L064V | 2007–Present |
| DEUTZ-FAHR | Agrotron TTV620 | TCD2013L064V | 2007–Present |
| FENDT | 712 Vario Deutz | TCD2012L06 4V | 2006–2011 |
| SAME | Iron 200 | F6M1013 | — |
| SCHAFFER | 900T Deutz | BF4M2012 | 2005–Present |
| DEUTZ-FAHR | Agri 605 | — | 00.1997–Present |

