
Your Mitsubishi FUSO Canter FE72DEV slips or shudders on pull-away, pointing to the clutch. The catalog lists ME512211, with cross numbers MFC-590, MFC590, 906121, 017-TYC518, T210A68, J2102011 and 3082 781 001. This guide covers a confident, code-based replacement.

The Mitsubishi FUSO ME512211 Clutch Kit is a heavy-duty automotive component built to the original 210mm diaphragm clutch cover assembly, 18.1kg specification. Its primary reference part number is ME512211, and the related reference numbers ME512211, MFC-590, MFC590, 906121, 017-TYC518, T210A68, J2102011, 3082 781 001, TYC518, CTX-084 are commonly used when sourcing a replacement. Knowing these codes prevents the wrong-fit returns that waste workshop time.
Symptoms of a Failing Mitsubishi FUSO ME512211 Clutch Kit
Most failures announce themselves before the unit dies completely. For the Mitsubishi FUSO ME512211 Clutch Kit, watch for intermittent operation, unusual noise, slow or no response, and visible wear on associated parts. Owners of Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks often report the problem only in cold starts or under load.
Intermittent or weak operation under load
Abnormal noise from the Mitsubishi FUSO Canter light-truck powertrains (FE72DEV series) area
Visible damage or excessive wear on mating parts
Warning lights or unstable system behavior
How to Diagnose Before Replacing
Before you order a new Mitsubishi FUSO ME512211 Clutch Kit, confirm the fault is the unit itself and not wiring, mounting or a related part. A quick bench or in-vehicle check against reference ME512211 and MFC-590 saves a needless purchase.
Inspect connectors, cabling and grounds for corrosion or looseness.
Verify the related system voltage and load behavior.
Compare the failed unit's tag with reference
906121.Confirm mounting, tooth count and rotation match the original.
Key Specifications You Must Match
Two units can share a family code yet differ in ways that matter. For the Mitsubishi FUSO ME512211 Clutch Kit the non-negotiable specs are 210mm diaphragm clutch cover assembly, 18.1kg. Mismatching any of these causes poor performance or immediate failure.
Voltage and output rating as listed for
017-TYC518Tooth count, rotation and mounting flange
Physical dimensions and connector type
Reference Part Numbers and Cross-Reference
The table below maps the real reference part numbers for the Mitsubishi FUSO ME512211 Clutch Kit as used across catalogs. Always confirm against the stamping on your original unit before ordering.
| Application | Reference Part Number | Cross-Reference / Notes |
|---|---|---|
| Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks | ME512211 | Primary reference part number |
| Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks | MFC-590 | Reference / cross number |
| Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks | 906121 | Reference / cross number |
| Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks | 017-TYC518 | Reference / cross number |
| Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks | T210A68 | Reference / cross number |
| Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks | J2102011 | Reference / cross number |
| Cross-reference set | 3082 781 001, TYC518, CTX-084 | Equivalent numbers seen across catalogs |
Installation and Fitment Tips
Correct fitment on Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks follows the original equipment procedure. Disconnect the battery first, support adjacent components, and torque fasteners to spec. Keep reference T210A68 handy so the supplier can confirm the exact variant.
FAQ
A: Yes, as long as it is a confirmed cross-reference such as the numbers in
ME512211, MFC-590, MFC590, 906121, 017-TYC518, T210A68, J2102011, 3082 781 001, TYC518, CTX-084. The reference part number is the safest single check; do not substitute on description alone.A: Match the 210mm diaphragm clutch cover assembly, 18.1kg exactly and confirm the application covers Mitsubishi FUSO Canter FE72DEV and same-spec 210mm Canter light trucks. Cross-check the stamping on the old unit against
ME512211 / MFC-590.A: Not necessarily. Match the original specification; overspec units can stress the circuit and underspec units will underperform on Mitsubishi FUSO Canter light-truck powertrains (FE72DEV series).
A: Yes. Every NuoJin listing for this line includes the full reference set
ME512211, MFC-590, MFC590, 906121, 017-TYC518, T210A68, J2102011, 3082 781 001, TYC518, CTX-084 plus cross numbers 3082 781 001, TYC518, CTX-084 for accurate sourcing.References
NuoJin Auto Parts product catalog — Mitsubishi FUSO ME512211 Clutch Kit reference part numbers.
Original equipment workshop manual for Mitsubishi FUSO Canter light-truck powertrains (FE72DEV series).
NuoJin distributor cross-reference database for ME512211, MFC-590, MFC590, 906121, 017-TYC518, T210A68, J2102011, 3082 781 001, TYC518, CTX-084.
ME512211, MFC-590, MFC590, 906121, 017-TYC518, T210A68, J2102011, 3082 781 001, TYC518, CTX-084. Quote the stamping on your original unit for a confirmed match.