clutch pressure plate ISC567 5-31220-024-0 ISC519 ，30210-C6000 5-31220-024-0 ISC519,8-94132-232-0 CG-301， 30210-C6000,8-97031-759-2 FOR Isuzu NPR59

The installation method for the Isuzu clutch pressure plate is as follows:Preparation Work: Park the vehicle on a flat surface, turn off the engine, and wait for it to cool down completely. Prepare suitable tools such as the clutch pressure plate, clutch disc, wrenches, screwdrivers, torque wrenches, and cleaning cloths. Meanwhile, inspect the appearance of the new clutch pressure plate to ensure there are no damages, deformations, or other defects.Removal of Old Components: Loosen the fixing bolts of the flywheel and carefully remove the old clutch pressure plate and clutch disc. During the removal process, handle them with care to avoid damaging surrounding components.Cleaning the Installation Area: Use a cleaning cloth to thoroughly clean the surface of the flywheel, removing residual grease, metal fragments, dust, and other impurities. Ensure the installation surface is clean and tidy to provide a good foundation for the installation of the new pressure plate.Installing the New Clutch Pressure Plate: Align the new clutch pressure plate with the installation position on the flywheel, ensuring that the locating pins of the pressure plate accurately fit into the locating holes of the flywheel and that the installation direction is correct. Then, use a torque wrench to gradually tighten the fixing bolts in a cross-tightening manner according to the specified torque value, ensuring the pressure plate is evenly stressed and securely installed. The bolt torque requirements may vary for different vehicle models, so refer to the vehicle repair manual for confirmation.Installing the Clutch Disc

When installing the Isuzu clutch pressure plate, the following precautions should be noted:Inspection before installationComponent inspection: Check whether the new clutch pressure plate has defects such as damage or deformation. At the same time, check the wear condition of related components such as the clutch disc and release bearing. If there are problems, they need to be replaced together. In addition, check whether the surface of the flywheel is flat and clean, and whether there are unevenness greater than 0.5 mm or heat spots. If such problems exist, consider replacing the flywheel.Cleaning the installation site: Use a clean cloth or cleaning agent to thoroughly remove oil stains, dust, impurities and rust from the flywheel installation surface and the pressure plate installation surface to ensure the installation surfaces are clean and flat. Otherwise, it may affect the fit between the pressure plate and the flywheel, leading to problems such as clutch slipping.Confirm component matching: Select a clutch pressure plate that matches the Isuzu model and engine to ensure its specifications and performance meet the vehicle's technical requirements. Pressure plates of different models may vary and cannot be mixed.Operations during installationPay attention to the installation direction

References：The content regarding the installation precautions for Isuzu clutch pressure plates does not have a specific, single source; it is compiled by integrating various automotive maintenance knowledge and experience. Some parts of the content refer to technical articles on professional automotive websites such as Autohome and PCauto. For example, key points like inspecting components before installation, cleaning the installation area, paying attention to the direction of the pressure plate during installation, and uniformly tightening bolts are similarly stated in articles such as "How to Install a Clutch Pressure Plate" on Autohome and "How to Install a Pressure Plate" on PCauto. At the same time, relevant content from automotive maintenance textbooks and practical training course standards has also been drawn upon. For instance, the practical training course standard of "Chassis Structure and Maintenance" mentions that when installing the clutch driven plate, the side with the damping spring retainer should face the pressure plate, which echoes the installation precautions mentioned earlier. In addition, it also incorporates general practical experience in the automotive maintenance field and the specific characteristics of Isuzu models, among other things.