clutch pressure plate 30210-3S620 30210-VJ210 ，30210-S3800，3021041T00 NSC613 30210-3S500 30210-3S510 30210-3S600 30210-3S610 30210-3S620 FOR Nissan

The installation method of Nissan's clutch pressure plate is similar to that of Toyota, but the specific details may vary depending on the model. The following takes the Nissan X-Trail as an example to introduce the installation method of its clutch pressure plate: •  Preparation Work: Prepare a new clutch disc set, clutch release tool, wrench, screwdriver, torque wrench, lubricant and other tools. Park the vehicle on a flat ground, ensure the vehicle has cooled down, and place it on a stable workbench.  •  Removal of Old Components: Use a jack to lift the vehicle and support it safely, then remove the transmission. Remove the tension spring of the release bearing and take out the old release bearing. Use a wrench and screwdriver to remove the fixing screws of the clutch pressure plate in sequence, then use a clutch release tool to separate the flywheel from the pressure plate, and take out the old clutch disc and pressure plate.  •  Cleaning the Installation Area: Carefully clean the flywheel with a cleaning cloth to remove oil stains, dust and impurities, ensuring the installation surface is clean and tidy. At the same time, check whether the flywheel surface is flat and smooth, and whether there are cracks or damages.Installing the clutch pressure plate: Align the new clutch pressure plate with the mounting holes on the flywheel, ensuring that the locating pins of the pressure plate fit into the locating holes of the flywheel. The matching marks on the clutch cover, pressure plate, and diaphragm spring should remain aligned. Use a guide locator or the transmission input shaft for centering to make the driven plate concentric with the pressure plate. Then temporarily secure the pressure plate with bolts.  •  Securing the pressure plate: Tighten the fixing bolts of the pressure plate according to the specified torque and sequence. For the Nissan X-Trail, the tightening torque for the pressure plate fixing bolts is 25Nm. When tightening, do so gradually in a diagonal sequence to ensure uniform force on the pressure plate.Installing the clutch disc: Keep the lining part of the clutch disc, the pressure plate, and the surface of the flywheel assembly away from oil and foreign objects. The side of the clutch driven disc with the damping disc should be installed facing the pressure plate. Align the center of the clutch disc with the centers of the flywheel and the pressure plate, then insert it gently. A mandrel or the transmission input shaft can be used for positioning to ensure the clutch disc is installed in place and can move freely.  •  Installing the release bearing: Install the new release bearing onto the release fork, and apply basic grease to the release bearing, each pivot point, and the bearing surfaces. Then install the release fork and release bearing assembly onto the transmission.Install other components: Install related components such as the release fork shaft in sequence. Both ends of the clutch release fork shaft must be concentric, and the installation position of the transmission arm of the clutch release fork shaft must be 195mm-205mm away from the fixed cable nut bracket.  •  Adjust the clutch pedal free travel: Adjust the free travel of the clutch pedal to 15mm-25mm.  •  Inspection and testing: After installation, check whether the clutch pressure plate, clutch disc and release bearing are installed firmly, and whether the gaps between various components meet the requirements. Gently rotate the clutch pressure plate to feel if it rotates smoothly, and if there is any jamming or abnormal noise. Then start the engine, check if the clutch operates smoothly, try shifting gears, and ensure everything is normal.

When installing a Nissan clutch pressure plate, in addition to the installation methods mentioned earlier, the following precautions should be noted: •  Mark alignment: The matching marks of the clutch cover, pressure plate, and diaphragm spring should be kept aligned to ensure the accuracy of the installation position.  •  Lubricate key parts: Each fulcrum, supporting surface, and release bearing should be coated with basic grease during assembly to reduce friction and wear and ensure the smooth operation of the clutch.  •  Correctly install the clutch disc: The side of the clutch driven disc with a damping disc should be installed towards the pressure plate, and a guide locator or transmission input shaft should be used for centering during installation to make the driven disc concentric with the pressure plate.Bolt tightening specifications: The pressure plate must be in contact with the flywheel. When tightening the bolts, they should be tightened one by one diagonally. For the Nissan X-Trail, the tightening torque is 25Nm.  •  Ensure component concentricity: Both ends of the release fork shaft must be concentric, and the installation position of the clutch release fork shaft transmission arm must be 195mm-205mm away from the fixed cable nut bracket.  •  Adjust pedal free travel: Adjust the free travel of the clutch pedal to 15mm-25mm to ensure the normal operation of the clutch.Avoid contact with oil stains: It is strictly prohibited to touch the clutch pressure plate with oil-stained hands, rags, or other oil-contaminated objects to prevent grease from seeping into the interior of the pressure plate and affecting its working performance.  •  Check spline fit: After installation, check the fit between the splines of the driven plate hub and the input shaft splines to ensure there is no jamming or looseness.

References：The content you mentioned regarding the precautions for installing Nissan clutch pressure plates is mainly from the relevant Q&A pages on Autohome. The details are as follows: • The title of the webpage is "What kind of clutch does the X-Trail have", the release time is March 22, 2024, and the link is https://www.autohome.com.cn/ask/4312056.html。

The title of the webpage is "Installation Diagram of Manual Qijun Clutch Disc", the release time is March 22, 2024, and the link is https://www.autohome.com.cn/ask/4306056.html.

The title of the webpage is "How to Install the Clutch of Nissan X-Trail", the release time is July 25, 2024, and the link is https://www.autohome.com.cn/ask/9397641.html.

The title of the webpage is "What are the precautions for installing a clutch disc?", the publication time is January 10, 2025, and the link is https://www.autohome.com.cn/ask/14053589.html.