Clutch kit 3000990207 3182 600 219 93317724 93317724 55579530 5679333 23820-63JA0 24422061 90523765 FOR Chevrolet, Alpha, Opel

Installation Steps •  Preliminary Preparation: Disconnect the negative terminal of the battery, lift the vehicle with a lift and secure it properly to ensure safety. Prepare tools such as socket wrenches, torque wrenches, and the new Chevrolet clutch kit.  •  Removal of Relevant Components: Depending on the model, remove components connected to the transmission such as the half-shaft or drive shaft. Then, remove the bolts at the connection between the engine and the transmission housing, including auxiliary devices like the shift mechanism. After that, remove the transmission to expose the clutch.Removing the old clutch assembly: Use a tool to secure the clutch flywheel, check the assembly marks between the clutch cover and the flywheel, and if there are none, pre-mark them. Then, loosen and remove the bolts connecting the clutch cover and the flywheel in a diagonal order, and take off the old clutch disc, pressure plate, and release bearing.  Installing the new clutch kit •  First, install the pilot bearing, ensuring it is properly seated.  •  Assemble the release sleeve, release bearing, fork, return spring, and other accessories in sequence, and apply basic grease to each pivot point, bearing surface, and the release bearing.  •  Install the new clutch disc onto the flywheel, noting that the side with the damper disc should face the pressure plate.  •  Use a pilot aligner or transmission input shaft for centering, install the pressure plate in the specified position, and tighten the pressure plate bolts sequentially in a diagonal pattern, with a tightening torque generally of 25Nm.Restore other components: Reinstall the gearbox onto the engine, connect components such as the half-shafts or drive shafts properly, and ensure the connections are secure.  •  Adjustment and testing: Adjust the installation position of the clutch release fork shaft transmission arm so that the distance from the fixed cable nut bracket is between 195mm and 205mm, then adjust the free travel of the clutch pedal to 15mm to 25mm. Finally, connect the negative pole of the battery, start the vehicle, and check if the clutch can work normally.

PrecautionsMark Alignment: The alignment marks of the clutch cover, pressure plate, and diaphragm spring must be aligned to ensure installation accuracy.Part Cleaning and Lubrication: Clean components such as the flywheel surface and transmission input shaft before installation to ensure there is no oil stain or impurity. Meanwhile, lubricate the parts that need lubrication, such as the release bearing.Bolt Tightening Torque: Bolts such as the pressure plate bolts and release bearing locking bolts must be tightened according to the specified torque. The locking torque of the release bearing is 15Nm to avoid faults caused by improper bolt tightening torque.Correct Installation Direction: The installation direction of the clutch disc must not be wrong; otherwise, it will affect the normal operation of the clutch.

References：The content you provided about the installation of Chevrolet clutch kits is mainly sourced from automotive-related websites such as Autohome and Pacific Auto Network. Among them, the content regarding the replacement steps and installation precautions for the Chevrolet Cruze clutch disc, such as "The alignment marks of the clutch cover, pressure plate, and diaphragm spring should be aligned", "When installing the clutch driven disc, the side with the damper disc should face the pressure plate", and "The pressure plate bolts should be tightened sequentially in a diagonal pattern with a torque of 25Nm", are all mentioned in articles such as "Chevrolet Cruze Clutch Replacement Tutorial, How to Install Cruze Clutch" on Autohome and "Chevrolet Cruze Clutch Replacement Tutorial, How to Install Cruze Clutch_Pacific Auto" on Pacific Auto Network.