Clutch Kit 03F141015 for Audi, SEAT, Skoda, Volkswagen
Applicable models:Audi, SEAT, Skoda, Volkswagen
Reference part number:000220900，03F141015 ,036 141 026 G，VCU302，QKT2639AF， 826326,036 141 015 BB,03F 141 015 A，03F141015,KT90245，HK7815,HK7815， VWK2120，622315500， CK9819， 877326，1347129,3000951771， WVW115， KE-VW07,ECK203， KC7815， 000220900
| Rated output : | |
| Pulley : | 28T |
| Size : | 30*30*5， |
| Weight : | Net weight 4.55 Gross weight 4.7 |
| Packaging : | Neutral packaging |
| Spot/Pre sale : | Presale |
| Warranty : | 1 year |
| Product number : |
| Type : | Clutch kit |
| Specification : | |
| Pulley : | 28T |
| Brand : | NUOJIN |
| Number : | |
| Quality : | new |
| Delivery time : | 30 days |
03F141015 Clutch Kit: What It Does
The 03F141015 kit contains the complete friction group. Replacing one element of a worn clutch and leaving the others is the most common reason a new clutch feels wrong from the first kilometre.
The part is supplied ready to fit, with the dimensions and the interface points matched to the original. That matters on a service part: a pulley, regulator or clutch component that is close but not correct will fail early and take surrounding parts with it.
Specification Summary
- Pressure plate with matched clamp load
- Friction disc with the original spline count
- Release bearing included
- Alignment tool supplied where required
Reference Numbers and Cross References
The part is listed under the following references:
- 03F141015
- VCU302
- QKT2639AF
- 826326
- 877326
- KT90245
- HK7815
- VWK2120
- 622315500
- CK9819
- 1347129
- 3000951771
- WVW115
- KE-VW07
- ECK203
- KC7815
Application Notes
On Audi, SEAT, Skoda, Volkswagen installations the gearbox is removed. Inspect the flywheel face, the release fork and the spigot bearing while the kit is going in.
Fitment follows the assembly, not the badge. Two vehicles of the same model year can use different parts, so check the number on the old unit.
Failure Modes
Heat ties the three parts together. An overheated clutch loses clamp load and glazes the lining at the same time, so the assembly as a whole stops holding torque.
Installation errors account for most early failures: a scored flywheel, a dry spline or bolts tightened in the wrong order.
Fault Symptoms
- Clutch slip under load
- Judder when pulling away
- Noise when the pedal is pressed
- High or low bite point
- Burning smell after hill starts
Checking Before Replacement
Check the flywheel for cracks, hot spots and wear steps. Machine or replace it as required before fitting the kit.
Inspect the mating surfaces and the fasteners before assembly. Most early failures trace back to something that was not renewed alongside.
Installation Notes
Clean the flywheel, align the disc with the tool supplied, fit the cover and torque the bolts in a cross pattern. Fit the new bearing, check pedal free play, then bed the clutch in gently for the first few hundred kilometres.
Related Parts to Check at the Same Time
- Flywheel
- Release fork and guide sleeve
- Spigot bearing
- Clutch cable or release cylinder
Quality Control and Supply
Hejian Nuojin Auto Parts Co., Ltd. inspects dimensions, materials and interfaces on every batch, then packs the parts in neutral cartons. Each unit carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Why did the original part fail?
Wear, heat and misalignment account for most failures. Correct installation and matching numbers prevent a repeat.
Is a warranty included?
Yes, one year against manufacturing defects, with neutral packing for resale.
How do I confirm the part number?
Read the number from the old unit, not from a catalogue illustration. Compare the key dimensions at the same time.
Can I fit this without special tools?
Most of these parts fit with standard hand tools. A pulley needs a spline holding tool, and a clutch needs an alignment tool.
