3701100E06A3 Alternator 12V 110A For Great Wall Hover
Applicable models:Great Wall Hover H3 (2.8TC, 2.8TCI, 2.5TCI)
Reference part number:3701100-E06-A3, JFZB1110-1400, JFZB1110-1404.
| Rated output : | 12v 110A |
| Pulley : | 6PK |
| Size : | 26*26*20 CM single unit inner box |
| Weight : | net weight：5KG |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | ACgenerator Alternator |
| Specification : | 12V 110A |
| Pulley : | 6PK |
| Brand : | NUOJIN |
| Number : | JFZB1110-1400 3701100-E06-A3 |
| Quality : | NEW |
| Delivery time : | 10DAY |
Product Overview
The 3701100-E06-A3 alternator (OE 3701100-E06-A3, JFZB1110-1400) is a new, OE-spec replacement unit built for the Great Wall Hover H3. Rated at 12V 110A output with a 6PK pulley, this alternator reliably recharges the battery and powers the electrical loads so your Hover keeps running even under heavy electrical load.
This aftermarket unit matches the original alternator requirements of the JFZB-series cross-reference. It is a factory-grade replacement, stocked in-house, backed by a 1-year warranty with a 10-day dispatch lead time. Consistent output under load keeps battery voltage stable and protects your starting and charging system.
Key physical specs: net weight 5 kg, supplied in a single-unit inner box with neutral kraft outer packaging.
Alternator For Great Wall Hover H3 Application
Great Wall Hover H3 vehicles rely on a correctly matched alternator so the battery stays charged and all electrical loads run reliably. This 12V 110A unit is engineered to match the original assembly for a straightforward bolt-on replacement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Primary OE number | 3701100-E06-A3 |
| Full cross-reference | JFZB1110-1400, JFZB1110-1404 |
| Voltage | 12V |
| Current | 110A |
| Pulley | 6PK |
| Application | Great Wall Hover H3 (2.8TC, 2.8TCI, 2.5TCI) |
| Quality | New |
| Warranty | 1 year |
| Net weight | 5 kg |
| Lead time | 10 days, in stock |
Engine Compatibility and Cross Reference
This alternator fits the Great Wall Hover H3. Do not rely solely on the vehicle model for fitment validation; always verify the engine, old alternator OE number, output rating, pulley type and mounting before ordering.
| Equipment | Application | Typical Models |
|---|---|---|
| Great Wall | SUV | Hover H3 |
| Engine variant | Diesel | 2.8TC, 2.8TCI, 2.5TCI |
| Alternator family | JFZB-series | JFZB1110-1400, JFZB1110-1404 |
Multiple OE numbers exist across different production batches, brand designations and market specifications for this same alternator. If your original alternator carries any one of the listed part numbers and the same output rating, the 3701100-E06-A3-series unit is a direct replacement.
What to Look for in a Replacement
Follow these six verification steps before placing your order to avoid wrong-part returns:
1. Check the rating of the original alternator: confirm it is 12V 110A. Different voltage or current ratings are not interchangeable.
2. Check the pulley: this unit has a 6PK pulley. Confirm it matches your belt system.
3. Confirm the mounting pattern and wiring layout match your Hover alternator bracket.
4. Verify the old alternator OE number appears in the cross-reference list above.
5. Confirm your vehicle, engine and alternator model before ordering.
6. Weight cross-check: a genuine matching unit weighs about 5 kg net; a significant weight difference indicates the wrong model or low-grade build quality.
Application Scenarios
Great Wall Hover H3 owners replacing a failed alternator.
Auto-electric specialists servicing charging faults, undercharging or dim-lighting issues.
Wholesale auto parts distributors and e-commerce sellers stocking Great Wall alternators.
Repair shops servicing Chinese SUVs and diesel vehicles.
Maintenance teams restoring charging systems to factory-standard condition.
Alternator Replacement Procedure
Alternator replacement must comply with the assembly specifications for low-voltage electrical equipment and the general requirements for engine charging systems. The following is a standardized replacement procedure, including compatibility inspection and practical precautions, to ensure stable operation after installation.
Preparation and Safety
Disconnect the battery: Always disconnect the battery negative terminal first to prevent short circuits and electrical injury during removal.
Prepare the correct sockets, torque wrench, and the new alternator. Confirm the new unit matches the old one in rating, pulley and mounting.
Removal of the Old Alternator
Disconnect the wiring harness and the B+ terminal from the alternator, noting the position and routing of each wire.
Release the belt tension and remove the drive belt from the pulley.
Remove the mounting bolts securing the alternator to the bracket, then lower the alternator out.
Installation of the New Alternator
Fit the new alternator into position and torque the mounting bolts to the specification for your Great Wall application (approximately 35 +/- 5 Nm).
Reconnect the B+ terminal (torque approximately 8 +/- 2 Nm) and the harness plug.
Reinstall and tension the drive belt to the correct specification for your Hover application.
Post-Installation Checks
Reconnect the battery and start the engine. Measure charging voltage across the battery with the engine running.
For a 12V system, confirm a steady charging voltage of approximately 14V.
Check for abnormal belt noise, loose mounting and correct belt tension after a short run.
FAQ
Q: Does this alternator fit my Great Wall Hover H3?
A: This 3701100-E06-A3-series alternator is built for the Great Wall Hover H3 (2.8TC, 2.8TCI, 2.5TCI). Always confirm your engine, old alternator OE number, output rating and pulley before ordering.
Q: My old alternator shows OE number JFZB1110-1400 or JFZB1110-1404. Will 3701100-E06-A3 work?
A: Yes. These OE numbers belong to the same Great Wall alternator family, differing only by production batch or market designation, so the 3701100-E06-A3-series unit serves as a direct replacement when the rating matches.
Q: Is this a new or remanufactured alternator?
A: This unit is a new alternator, built to original specifications and backed by a 1-year warranty.
Q: Can I install this alternator myself?
A: Yes, with basic hand tools and care. Always disconnect the battery first, tension the belt correctly, torque the mounting bolts and B+ terminal correctly, and confirm stable charging voltage. If unsure, use a professional technician.
Q: What is your warranty and lead time?
A: Goods are in stock with a 10-day dispatch lead time. A 1-year warranty applies from installation date; it excludes damage caused by improper installation, wiring errors or charging-system faults.
In Practice
For technicians working on Great Wall charging systems: before committing to an alternator replacement, bench-test the old alternator and check the battery, cables, belt and wiring. A weak battery, corroded cable, loose belt or faulty voltage regulator can mimic alternator-failure symptoms, so do not replace the alternator blindly. Always disconnect the battery before commencing removal.
Photograph and note the routing of the harness and the B+ terminal during removal to avoid mis-wiring. Confirm the new alternator is 12V 110A with a 6PK pulley and that it fits the Hover bracket before installation. Torque the B+ terminal to about 8 +/- 2 Nm and the mounting bolts to about 35 +/- 5 Nm, then start the engine and verify a steady charging voltage of approximately 14V.
References
The replacement method and related precautions are standardized content summarized and integrated based on the universal assembly specifications of engine charging systems, industry standards for low-voltage alternator replacement of the same specification, and practical experience in the automotive repair field. Equipment applications are compiled from original-equipment fitment data for the 3701100-E06-A3-series alternator family covering the Great Wall Hover H3.
About the Author
This article was written by the senior auto-electric technician team at Nuojin Auto Parts, with over 15 years of hands-on experience in automotive charging and starting systems.
Our engineers specialise in Japanese, European, Korean, American and Chinese vehicle charging-system diagnostics, aftermarket alternator and starter-motor cross-referencing, and factory-spec electrical-system restoration for global markets. Every product listing on this site is backed by real bench-tested fitment data and first-hand repair experience, not just copied from manufacturer manuals.
If you have any question about this alternator or your charging-system repair, contact our technical team and we will help you confirm the correct part for your application.
Nuojin Auto Parts is a professional starter and alternator supplier based in Hejian, Hebei, China, running factory-grade bench testing on every production batch. We support distributors, wholesalers and repair shops worldwide with correct-fit sourcing, a 1-year warranty and responsive after-sales technical assistance.
