
8981965850 Isuzu Alternator 12V 80A 7PK
Applicable models:For Isuzu 4JJ1-TC diesel engines
Reference part number: 8981965850, 8982290710, 8982290711, 104210-9960, 104210-9030, 104210-9031, 104210-9032, 104210-9033, 104210-9840, 8-97361-871-0, 8973618710, 8-97369-716-1, 8973697161, 8-98229071-0, 8-98229071-1, 8-98229-071-0, 8-98229-071-1, 8-98006-084-0, 8980060840, 8-98153-004-0, 8981530040, LR190-763, LR190763, LR190-76, ZJ12650240417, 104-142, 104142.
| Rated output : | 12V 80A / 100A |
| Pulley : | 7PK |
| Size : | 24*12*16single unit inner box |
| Weight : | net weight:4.3KG gross weight:4.65KG |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | ACgenerator Alternator |
| Specification : | 12V 80A /100A |
| Pulley : | 7PK |
| Brand : | NUOJIN |
| Number : | 8981965850 8982290710 |
| Quality : | new |
| Delivery time : | 10DAY |





Product Overview
The 8981965850-series alternator (OE 8981965850, 8982290710, 104210-9960) is a new, OE-spec replacement charging unit built for the Isuzu 4JJ1-TC diesel engine, a proven 4-cylinder powerplant widely used in Isuzu trucks, light commercial vehicles and industrial applications. Rated at 12V 80A / 100A with a 7PK pulley, this alternator restores stable battery charging and dependable electrical-system operation so your vehicle keeps running reliably.
This aftermarket unit matches the original charging-system requirements of the Isuzu 4JJ1-TC engine family. It delivers consistent output across the load range, keeping the battery charged and the electrical system stable. The unit is stocked in-house, backed by a 1-year warranty with a 10-day dispatch lead time. Reliable charging output design guarantees dependable electrical-system performance for your 12V vehicle.
Key physical specs: net weight 4.3 kg, gross weight 4.65 kg, overall dimensions 24 x 12 x 16 cm, supplied in a neutral kraft inner carton.
Isuzu 4JJ1-TC Engine and Charging System
The Isuzu 4JJ1-TC is a 4-cylinder turbo diesel widely fitted to Isuzu trucks and light commercial vehicles. These vehicles rely on a correct 12V alternator match so the battery is properly charged and all electrical loads run reliably. The 7PK pulley is engineered to match the serpentine belt drive system for dependable operation after installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| OE numbers | 8981965850, 8982290710, 8982290711, 104210-9960, 104210-9030, 104210-9031, 104210-9032, 104210-9033, 104210-9840, 8-97361-871-0, 8973618710, 8-97369-716-1, 8973697161, 8-98229071-0, 8-98229071-1, 8-98229-071-0, 8-98229-071-1, 8-98006-084-0, 8980060840, 8-98153-004-0, 8981530040, LR190-763, LR190763, LR190-76, ZJ12650240417, 104-142, 104142 |
| Voltage | 12V |
| Rated output | 80A / 100A |
| Pulley | 7PK |
| Application | Isuzu 4JJ1-TC diesel engine |
| Quality | New |
| Warranty | 1 year |
| Net weight | 4.3 kg |
| Gross weight | 4.65 kg |
| Dimensions | 24 x 12 x 16 cm |
| Packaging | Neutral kraft box |
| Lead time | 10 days, in stock |
Engine Compatibility and Cross Reference
This alternator fits Isuzu 4JJ1-TC diesel engines. Do not rely solely on the engine model for fitment validation; always verify the engine model, pulley groove count, mounting brackets, wiring connector and output rating stamped on your original alternator.
| Equipment | Engine | Typical Applications |
|---|---|---|
| Isuzu truck | 4JJ1-TC | N-series light trucks and commercial vehicles |
| Commercial use | 4JJ1-TC | Light commercial and delivery vehicles |
| Industrial use | 4JJ1-TC | Related Isuzu 4JJ1 applications |
Multiple OE numbers exist across different production batches for this same alternator family. If your original alternator carries any one of the listed part numbers, the 8981965850-series unit is a direct drop-in replacement.
What to Look for in a Replacement
Follow these five verification steps before placing your order to avoid wrong-part returns:
1. Check the nameplate data on your old alternator: confirm the output is 12V 80A / 100A. A different voltage or output rating is not interchangeable.
2. Confirm the pulley is 7PK. A mismatched groove count will slip the belt and cause under-charging.
3. Confirm your engine is an Isuzu 4JJ1-TC. Other engine families use different alternator assemblies.
4. Match the OE / reference part numbers stamped on your original alternator housing.
5. Weight cross-check: a genuine matching unit weighs about 4.3 kg net; a significant weight difference indicates the wrong assembly or low-grade build quality.
Application Scenarios
Independent repair shops and auto-electric workshops servicing Isuzu 4JJ1-TC powered vehicles across Asia, the Middle East, Africa, Europe and Latin America.
Parts counters and jobbers stocking Japanese commercial-vehicle charging and starting electrical components.
Isuzu N-series truck and light commercial vehicle fleet operators.
Used vehicle export traders supplying second-hand Isuzu trucks to global secondary markets.
Maintenance teams restoring vehicles to factory-standard condition.
Installation Steps and Precautions
Installation must comply with the assembly specifications for low-voltage electrical equipment and the general requirements for engine charging systems. The following are standardized installation steps, including compatibility inspection and practical operation precautions, to ensure stable operation after installation.
Pre-Installation Preparation
Power cut protection: Turn off the engine ignition switch and disconnect the negative battery cable to avoid short circuits caused by accidental circuit contact during installation.
Tool preparation: Prepare a torque wrench, socket set, screwdriver, belt tension gauge, wire harness clips, conductive paste, metal cleaner and rags. Have small accessories such as gaskets of the same specification ready.
Component and Compatibility Inspection
Confirm the new alternator is the 12V 80A/100A model with a 7PK pulley and compatible with the engine of the target vehicle.
Check that the alternator housing has no cracks, the pulley rotates freely without wobble, the cooling fan is intact, and the terminal studs are in good condition.
When replacing an old alternator, clean the oil stains and rust at the old installation position. Inspect the serpentine belt for wear or cracking and replace it if necessary before installing the alternator.
Cleaning the Installation Workstation
The alternator is usually installed on the engine front bracket. For some vehicles, first remove the surrounding air filter box, small pipeline brackets or wire harness shields, clear obstructing wire harnesses, and reserve sufficient operating space to prevent component interference during installation.
Securing the Main Body of the Alternator
Firmly fit the alternator onto the engine mounting bracket. Align the pulley with the serpentine belt path to ensure correct belt alignment without misalignment or slipping, so as to ensure reliable drive during subsequent operation.
Pre-tighten 2-3 matching fixing bolts diagonally, then tighten them to the standard torque with a torque wrench (fine-tune with reference to the corresponding Isuzu maintenance manual). Insufficient torque leads to violent vibration during operation, while excessive torque may damage the housing or the bracket threads.
Connecting the Electrical Circuits
Output terminal (B+): Locate the alternator main output terminal and connect the charging wire from the battery. Before connection, wipe the terminal with a cleaner to remove the oxide layer; if necessary, apply a small amount of conductive paste to reduce contact resistance. Tighten the terminal nut to 8+/-2 Nm to prevent the terminal from overheating and ablation when a large current passes through the charging circuit.
Excitation / sense terminal (D+ or IG): Connect the excitation or ignition-sense wire to the alternator excitation terminal. Do not insert or pull the connector forcefully to avoid bending and damaging the pins. When arranging the wire harness, keep it away from rotating components such as the engine pulley and fan. Fix the harness with clips to prevent wear and leakage during operation.
Finalization and Functional Testing
Reinstall the previously removed components such as the air filter box and pipeline brackets in sequence, and confirm all shields and clips are properly installed. Reconnect the negative battery cable, tighten the terminal nut, and check for no looseness.
Start the engine and verify the charging output: with the engine running, the charging voltage should read between 13.8V and 14.5V across the battery terminals. Confirm the charge indicator lamp goes out and no abnormal noise comes from the alternator.
If the charge lamp stays on or charging voltage is too low, check belt tension, alternator drive and wiring connections. If output voltage exceeds 15V, the voltage regulator may be at fault.
FAQ
Q: Does this alternator fit all Isuzu 4JJ1-TC engines?
A: Yes. This 8981965850-series alternator is built for Isuzu 4JJ1-TC diesel engines. Always confirm your engine and old-alternator OE number before ordering.
Q: My old alternator shows OE number 8982290710 or 104210-9960 or 104210-9033. Will 8981965850 work?
A: Yes. These OE numbers belong to the same alternator family, differing only by production revision and market specification, so the 8981965850-series unit serves as a direct replacement.
Q: Is this a new or remanufactured alternator?
A: This unit is a new alternator, quality-tested to original specifications and backed by a 1-year warranty.
Q: What is the normal charging voltage for a 12V system?
A: With the engine running, charging voltage should read between 13.8V and 14.5V across the battery terminals. Below 13V indicates an under-charging problem; above 15V suggests a regulator fault.
Q: What is your warranty and lead time?
A: Goods are in stock with a 10-day dispatch lead time. A 1-year warranty applies from installation date; it excludes damage caused by mis-installation, poor cable connections, reversed polarity or vehicle electrical-system faults.
In Practice
For technicians working on Isuzu 4JJ1-TC platforms: before removing the existing alternator, perform charging-system diagnostics. Measure battery voltage with the engine off and running. Defective batteries, corroded cables, bad ground points or a slipping belt can mimic alternator-failure symptoms, so do not replace the alternator blindly. Always disconnect the battery negative terminal before commencing removal work.
Take photos of wiring terminals and bolt positions during disassembly to avoid mis-wiring during reassembly. Inspect the serpentine belt and tensioner before fitting the new alternator, because a worn belt or weak tensioner will quickly reduce charging output. Tighten mounting bolts to the Isuzu official workshop-manual torque specifications.
References
The installation method and related precautions are standardized content summarized and integrated based on the universal assembly specifications of Isuzu engine charging systems, industry installation standards for low-voltage alternators of the same specification, and practical experience in the automotive repair field. Equipment applications are compiled from original-equipment fitment data for the 8981965850-series alternator family covering Isuzu 4JJ1-TC applications.
About the Author
This article was written by the senior auto-electric technician team at Nuojin Auto Parts, with over 15 years of hands-on experience in automotive charging and starting systems.
Our engineers specialise in Japanese, European, Korean, American and Chinese vehicle charging-system diagnostics, aftermarket alternator and starter-motor cross-referencing, and factory-spec electrical-system restoration for global markets. Every product listing on this site is backed by real bench-tested fitment data and first-hand repair experience, not just copied from manufacturer manuals.
If you have any question about this alternator or your engine charging system, contact our technical team and we will help you confirm the correct part for your application.
Nuojin Auto Parts is a professional starter and alternator supplier based in Hejian, Hebei, China, running factory-grade bench testing on every production batch. We support distributors, wholesalers and repair shops worldwide with correct-fit sourcing, a 1-year warranty and responsive after-sales technical assistance.

