ENGINE Starter428000-9140 0001153510 6459060800 2709060026, 270906002680
Applicable models:BenzA180 A200 GLA200
Reference part number:428000-9140 438000-2050 270906070080 0001153510 6459060800 438000-2050 270906070080
| Power horsepower : | 12V 1.6KW |
| Number of feet : | 13T |
| Size : | 24*12*16single unit inner box |
| Weight : | net weight：6KG |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | starter |
| Specification : | 12V 1.6KW |
| Number of feet : | 13T |
| Brand : | nuojin |
| Number : | 428000-9140 0001153510 |
| Quality : | Remanufacture |
| Delivery time : | 10 day |
Mercedes-Benz Starter Installation Steps
Step Operation Content Key Details
1 Disconnect Power Disconnect the negative battery cable first to prevent electric shock and short circuits.
2 Lift Vehicle Use a jack or lift to raise the front of the vehicle and support it firmly with stands.
3 Remove Panels Remove the engine under panel and air filter; remove the intake manifold bracket if necessary for easier operation.
4 Locate Starter It is located on the clutch housing where the engine connects to the transmission, usually with 2 fixing bolts.
5 Remove Old Starter Unscrew the main power wire nut (12~13mm) and control wire plug, then remove the fixing bolts (E14 or 17mm) and take out the starter.
6 Clean and Inspect Clean oil stains and rust from the installation surface; check if the flywheel ring gear and starter gear are worn.
7 Install New Starter Align the position and insert it, first tighten the fixing bolts (according to torque: approximately 50~70 N・m), then connect the main power wire and control wire.
8 Restore Components Reinstall panels, air filter, etc., ensuring no parts are missing.
9 Connect Power Reconnect the negative battery cable.
10 Test Start Start the vehicle to confirm the starter operates normally with no abnormal noise or jamming."
}undefined
for reference only
Note during installation: • The main live wire is directly connected to the battery; power operation is strictly prohibited throughout the installation process. • Due to the oil heat exchanger blocking in some diesel vehicle models, the starter motor needs to be lifted out after raising the engine first. • Bolt specifications and positions may vary for different vehicle models (such as W124, SLK, GLC, etc.), it is recommended to refer to the corresponding repair manual."
}undefined
Mainly integrated from the following sources: • Mercedes-Benz W124 Starter Removal and Installation, July 15, 2019 • 2015 Mercedes GLA220 Full Vehicle Repair Manual, May 4, 2020 • Mercedes-Benz W203 Starter Replacement, July 15, 2019 • Mercedes-Benz W124 Starter Replacement, July 15, 2019 • Automanuals.biz Mercedes E-Class Starter Installation, no specific date"
}undefined
for reference only
