4280002060 Starter Motor 12V 0.7KW For Honda Jazz
Applicable models:Honda Jazz II 1.2i GD (L12A1), Jazz II 1.3i DSi GD (L13A1), Jazz II 1.4 GD, 2002-2006
Reference part number:428000-2060, 0986022611, F032CS1364, 115362, CST40256, CST40256AS, DRT2611, 4280000360, 4280000950, 4280000960, 4280002060, JS1364, 8EA738258521, 31200PWA003, 31200PWAG01, 31200PWAG51, 31200PWC901, 31200REJW01, DDVDS, DDVDT, DDVDU, DSKEA, STN1364AB, STN1364BA, STN1364ZD, STN1364RB, STN1364WA, 33181N, 300N11061Z, 17998, 31200PWA901, 31200RB1013, LRS02768.
| Power horsepower : | 12V 0.7KW |
| Number of feet : | 9T |
| Size : | 24*12*16single unit inner box |
| Weight : | net weight：6KG |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | ENGINE STARTER |
| Specification : | 12V 0.7KW |
| Number of feet : | 9T |
| Brand : | NUOJIN |
| Number : | 428000-2060 |
| Quality : | NEW |
| Delivery time : | 10DAY |
Product Overview
The 428000-2060 starter motor (OE 428000-2060, 0986022611) is a new, OE-spec replacement unit built for the Honda Jazz II (Fit). Rated at 12V 0.7KW with a 9T drive gear, this starter produces dependable cranking torque so your Honda engine starts reliably, even in cold conditions or after long periods of inactivity.
This aftermarket unit matches the original starter requirements of the Honda Jazz starter family and the 428000-2060-series cross-reference. It is a factory-grade replacement, stocked in-house, backed by a 1-year warranty with a 10-day dispatch lead time. Precise OE-matched output ensures clean gear engagement and consistent cranking.
Key physical specs: net weight 6 kg, supplied in a single-unit inner box with neutral kraft outer packaging.
Starter For Honda Jazz II Application
Honda Jazz II (Fit) vehicles rely on a correctly matched starter so the engine cranks reliably. This 12V 0.7KW unit is engineered to match the original assembly for a straightforward bolt-on replacement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Primary OE number | 428000-2060 |
| Full cross-reference | 0986022611, F032CS1364, 115362, CST40256, CST40256AS, DRT2611, 4280000360, 4280000950, 4280000960, 4280002060, JS1364, 8EA738258521, 31200PWA003, 31200PWAG01, 31200PWAG51, 31200PWC901, 31200REJW01, DDVDS, DDVDT, DDVDU, DSKEA, STN1364AB, STN1364BA, STN1364ZD, STN1364RB, STN1364WA, 33181N, 300N11061Z, 17998, 31200PWA901, 31200RB1013, LRS02768 |
| Voltage | 12V |
| Power | 0.7KW |
| Drive teeth | 9T |
| Application | Honda Jazz II (Fit) 1.2i, 1.3i DSi, 1.4, 2002-2006 |
| Quality | New |
| Warranty | 1 year |
| Net weight | 6 kg |
| Lead time | 10 days, in stock |
Engine Compatibility and Cross Reference
This starter fits Honda Jazz II (Fit) GD. Do not rely solely on the vehicle model for fitment validation; always verify the engine code, old starter OE number, power rating and drive tooth count before ordering.
| Equipment | Application | Typical Models |
|---|---|---|
| Honda | Hatchback | Jazz II 1.2i GD (L12A1), 1243ccm |
| Honda | Hatchback | Jazz II 1.3i DSi GD (L13A1), 1339ccm |
| Honda | Hatchback | Jazz II 1.4 GD, 2002-2006 |
Multiple OE numbers exist across different production batches, brand designations and market specifications for this same starter. If your original starter carries any one of the listed part numbers and the same output rating, the 428000-2060-series unit is a direct replacement.
What to Look for in a Replacement
Follow these six verification steps before placing your order to avoid wrong-part returns:
1. Check the rating of the original starter: confirm it is 12V 0.7KW. Different voltage or power ratings are not interchangeable.
2. Check the drive gear: this unit has 9 teeth (9T). Confirm it matches your flywheel ring gear.
3. Confirm the mounting pattern and wiring layout match your Honda Jazz starter bracket.
4. Verify the old starter OE number appears in the cross-reference list above.
5. Confirm your vehicle, engine code and starter model before ordering.
6. Weight cross-check: a genuine matching unit weighs about 6 kg net; a significant weight difference indicates the wrong model or low-grade build quality.
Application Scenarios
Honda Jazz II (Fit) owners replacing a failed starter.
Auto-electric specialists servicing no-start faults, slow cranking or starter clicking issues.
Wholesale auto parts distributors and e-commerce sellers stocking Honda starters.
Repair shops servicing Japanese compact hatchbacks.
Maintenance teams restoring starting systems to factory-standard condition.
Starter Replacement Procedure
Starter replacement must comply with the assembly specifications for low-voltage electrical equipment and the general requirements for engine starting systems. The following is a standardized replacement procedure, including compatibility inspection and practical precautions, to ensure stable operation after installation.
Preparation and Safety
Disconnect the battery: Always disconnect the battery negative terminal first to prevent short circuits and electrical injury during removal.
Prepare the correct sockets, torque wrench, and the new starter. Confirm the new unit matches the old one in rating and mounting.
Removal of the Old Starter
Disconnect the wiring harness and the battery (B+) terminal from the solenoid, noting the position and routing of each wire.
Remove the mounting bolts securing the starter to the bell housing.
Lower the starter out, supporting it to avoid damage to the flywheel housing or wiring.
Installation of the New Starter
Fit the new starter into position and torque the mounting bolts to the specification for your Honda application (approximately 35 +/- 5 Nm).
Reconnect the B+ terminal (torque approximately 8 +/- 2 Nm) and the solenoid harness plug.
Post-Installation Checks
Reconnect the battery and perform a cranking test. The engine should crank quickly and engage cleanly, with no grinding or clicking noise.
Check for abnormal noise, arcing at the solenoid terminals and battery charge level. Do not crank continuously for more than 10 seconds at a time.
FAQ
Q: Does this starter fit my Honda Jazz II (Fit)?
A: This 428000-2060-series starter is built for Honda Jazz II 1.2i (L12A1), 1.3i DSi (L13A1) and 1.4 GD. Always confirm your engine code, old starter OE number and power rating before ordering.
Q: My old starter shows OE number 0986022611 or F032CS1364. Will 428000-2060 work?
A: Yes. These OE numbers belong to the same Honda Jazz starter family, differing only by production batch or market designation, so the 428000-2060-series unit serves as a direct replacement when the rating matches.
Q: Is this a new or remanufactured starter?
A: This unit is a new starter, built to original specifications and backed by a 1-year warranty.
Q: Can I install this starter myself?
A: Yes, with basic hand tools and care. Always disconnect the battery first, torque the mounting bolts and B+ terminal correctly, and confirm clean gear engagement. If unsure, use a professional technician.
Q: What is your warranty and lead time?
A: Goods are in stock with a 10-day dispatch lead time. A 1-year warranty applies from installation date; it excludes damage caused by improper installation, wiring errors or starting-system faults.
In Practice
For technicians working on Honda Jazz starting systems: before committing to a starter replacement, bench-test the old starter and check the battery, cables, ignition switch and flywheel ring gear. A weak battery, corroded cable, faulty ignition switch or damaged ring gear can mimic starter-failure symptoms, so do not replace the starter blindly. Always disconnect the battery before commencing removal.
Photograph and note the routing of the harness and the B+ terminal during removal to avoid mis-wiring. Confirm the new starter is 12V 0.7KW with a 9T drive gear and that it fits the Jazz bracket before installation. Torque the B+ terminal to about 8 +/- 2 Nm and the mounting bolts to about 35 +/- 5 Nm, then perform a cranking test and check for clean gear engagement.
References
The replacement method and related precautions are standardized content summarized and integrated based on the universal assembly specifications of engine starting systems, industry standards for low-voltage starter replacement of the same specification, and practical experience in the automotive repair field. Equipment applications are compiled from original-equipment fitment data for the 428000-2060-series starter family covering the Honda Jazz II (Fit).
About the Author
This article was written by the senior auto-electric technician team at Nuojin Auto Parts, with over 15 years of hands-on experience in automotive charging and starting systems.
Our engineers specialise in Japanese, European, Korean, American and Chinese vehicle charging-system diagnostics, aftermarket alternator and starter-motor cross-referencing, and factory-spec electrical-system restoration for global markets. Every product listing on this site is backed by real bench-tested fitment data and first-hand repair experience, not just copied from manufacturer manuals.
If you have any question about this starter or your starting-system repair, contact our technical team and we will help you confirm the correct part for your application.
Nuojin Auto Parts is a professional starter and alternator supplier based in Hejian, Hebei, China, running factory-grade bench testing on every production batch. We support distributors, wholesalers and repair shops worldwide with correct-fit sourcing, a 1-year warranty and responsive after-sales technical assistance.
