
12V 1.0KW 9T Starter Motor 4A-FE28100-16040 for Toyota starter 4A-FE2
Applicable models:Toyota starter 4A-FE2
Reference part number:28100-16040 STG92222 17256 S1105 228000-2940, 8212314 0986019141, 0986019161, 0986020531.CST40116AS 128000568, 1280005680, 1280005681, 1280005682,128000642, 1280006420, 1280006421, 1280006422 STN3760RD, STN3760TJ. LUCAS: LRS995.
| Power horsepower : | 1.0KW 12v |
| Number of feet : | 9T |
| Size : | 24*12*16single unit inner box |
| Weight : | 净重3.05kg 毛重3.2kg |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | ENGINE STARTER |
| Specification : | 1.0KW 12v |
| Number of feet : | 9T |
| Brand : | NUOJIN |
| Number : | 28100-16040//28100-16180 |
| Quality : | NEW |
| Delivery time : | 30DAYS |





Overview of the 4A-FE28100-16040 Starter Motor
Toyota starter 4A-FE2 owners replacing a tired starter will find the 4A-FE28100-16040 a direct fit: a 12V, 1.0 kW reduction-gear unit with a pre-engaged solenoid, produced to the original flange and terminal layout.
Cranking load varies with temperature, battery condition and engine condition. A healthy starter has margin for all three; a worn one turns the engine just slowly enough that the control unit hesitates and the driver notices long, laboured starts.
Key Specifications
- Rated voltage: 12V
- Rated output: 1.0 kW
- Pinion: 9 teeth
- Type: reduction gear starter with pre-engaged solenoid
- Application: Toyota starter 4A-FE2
- Net weight: approximately 3.2 kg
- Condition: new, direct replacement for the original unit
A 12V 1.0 kW rating is the output the motor can hold while cranking, not a peak figure. It is sized so the engine reaches starting speed on the first or second revolution, which is what makes a healthy start feel immediate.
The reduction gearset lets the motor run at high speed while the pinion turns slowly with high torque, which is why the unit stays compact enough for a crowded engine bay.
Reference Numbers and Cross References
The starter is supplied against the following references, which help identify it against the unit already fitted to the vehicle:
- 4A-FE28100-16040
- STG92222
- 228000-2940
- 28100-16040
- S1105
- 0986020531.CST40116AS
- STN3760RD
- STN3760TJ
- LRS995
- 28100-16180
Starter suppliers revised this design more than once during production. Confirm the number on the old unit, or send a photograph of the drive end, before committing to an order. This starter is listed with 10 references in total.
Matching the Unit to the Vehicle
This starter family was fitted to a range of Toyota applications, and the part number changed as engines and flywheels were revised. The unit listed here covers the references above and is a direct replacement where those numbers match. For the 4A-FE28100-16040, the practical check is the number stamped on the housing.
Vehicles that have had an engine or gearbox replacement may already carry a different starter from the one the catalogue expects, so treat the paperwork as a starting point rather than the final answer.
Common Failure Patterns
Most failures start at the solenoid contact. Each start switches the full cranking current through a copper disc, and after thousands of cycles that disc pits and burns. The result is the familiar single click with no rotation, or a delay before the motor turns.
Heat is the underlying cause in most cases. The starter sits close to the exhaust, and after a hot shutdown the solenoid winding and brush plate soak in heat with no airflow. Resin hardens, springs lose tension and the contact oxidises. Owners of Toyota starter 4A-FE2 should treat the 4A-FE28100-16040 reference list as a starting point, not the final answer.
Symptoms of a Failing Starter
- Cranking that sounds normal but takes longer than it used to
- Several attempts needed before the motor engages
- Black carbon dust inside the drive end housing
- Voltage dip that dims the lights during cranking
- Starter that responds to a tap on the housing but not to the key alone
Before replacing the starter, check the battery state of charge, the terminal clamps, the engine earth strap and the main cable. On vehicles of this age a corroded earth connection produces exactly the same slow-crank symptom and costs far less to correct. For the 4A-FE28100-16040, the practical check is the number stamped on the housing.
Checks Before Installation
- State of charge and age of the battery
- Corrosion on the earth strap and the engine-to-body bond
- Pinion tooth count against the ring gear
- Free movement of the new pinion before fitting
- That the signal wire connector seats fully on the solenoid
Most comebacks after a starter replacement trace back to something that was not checked before the unit went on: a tired battery, a corroded earth or a chipped ring gear. Ten minutes with a multimeter and a torch prevents the second repair.
Installation Notes
Raise and support the vehicle where the starter is reached from below, disconnect the battery, and detach the main cable and signal wire. Note the cable positions before removal so the replacement goes back the same way.
Clean the mounting face and inspect the ring gear teeth through the starter aperture. Fit the replacement with the original bolts, reconnect the cables in the same order and tighten the main terminal firmly. Crank the engine briefly and listen for clean engagement and release. The 4A-FE28100-16040 is built to the same flange pattern as the unit it replaces.
Quality Control and Supply from Hejian Nuojin Auto Parts Co., Ltd.
Hejian Nuojin Auto Parts Co., Ltd. manufactures starter and alternator components for the aftermarket. Every unit is bench tested for no-load current draw, solenoid pull-in and release voltage, pinion throw and running noise before packing.
Common references are kept in stock for fast dispatch, volume orders are delivered in around 30 days and each starter carries a one-year warranty against manufacturing defects.
Frequently Asked Questions
Does this starter come with the solenoid?
Yes. The unit is supplied complete with its solenoid, as shown in the product photographs. Mounting bolts are not included.
Is a 12V and a 24V starter interchangeable?
No. The voltage rating must match the vehicle system; fitting the wrong unit will damage the starter and the wiring.
Can the solenoid be replaced on its own?
It is possible, provided the motor draws normal current and the pinion is sound. Where the brushes are already short, replacing the complete starter avoids a second repair within a year.
Does the starter need any maintenance?
No routine maintenance is required. Keeping the battery, terminals and earth connections clean is what extends starter life in practice.
Installation Method for Toyota 12V 1.0KW Starter
I. Pre-installation Preparation
1. Tool and Material Preparation
| Category | Specific List |
|---|---|
| Essential Tools | 10-14mm socket wrenches, torque wrench (accuracy ±3%), Phillips/flathead screwdriver, ratchet wrench, extension bar, snap ring pliers, wire brush, torque calibrator (optional) |
| Auxiliary Materials | High-temperature resistant threadlocker (Loctite 243), conductive grease, Toyota special grease (08887-01206), new O-rings, flat washers, lock washers, rust-proof sandpaper, terminal protection covers |
2. Safety and Compatibility Checks
- Disconnect the negative battery cable and wait for 5 minutes to release residual electrical energy in the circuit, preventing short circuits that could damage the solenoid or ECU. The tightening torque for the negative battery terminal is 7.8-9.8N·m.
- Verify the starter part number and ensure the 12V 1.0KW specification is compatible with the flywheel ring gear (commonly 10T/11T) to match the power requirements of the corresponding engine model.
- Inspect the new starter: no cracks on the housing, sensitive operation of the solenoid, no jamming of the drive gear, and free one-way rotation of the overrunning clutch without obstruction.
- Before removing the old starter, mark the corresponding positions of wires and terminals with a marker and take photos to avoid wiring errors during reinstallation.
II. Core Installation Steps
1. Cleaning and Positioning of Mounting Surfaces
2. Meshing Gap Calibration
If the gap is too small: Loosen the mounting bolts and slightly pry the starter housing with a copper crowbar to fine-tune the position (do not strike with iron tools to prevent housing deformation);
If the gap is too large: Check the wear degree of the flywheel ring gear (replace if tooth thickness is reduced by more than 1/3) or deformation of the mounting bracket, and replace damaged parts if necessary.
3. Bolt Tightening (Torque and Sequence)
Apply a small amount of high-temperature resistant threadlocker (Loctite 243) to the bolt threads to prevent bolt loosening due to engine vibration;
Never overtighten to avoid thread slipping in the cylinder block or cracking of the starter flange;
After tightening, rotate the flywheel again to confirm no jamming or abnormal noise between the drive gear and ring gear.
4. Electrical Circuit Connection (Key Specifications)
- Main power cable connection: Connect the thick copper power cable to the solenoid’s "B+" (+) terminal with a flat washer and lock washer, tighten to 8-12N·m, apply conductive grease to the joint to enhance conductivity, and polish the oxide layer on the terminal surface to ensure a tight connection.
- Control wire connection: Connect the thin control wire to the solenoid’s "S" (IGN) terminal, tighten to 5-8N·m. Never connect the control wire to the B+ terminal (this will cause an immediate short circuit, burning the wiring, solenoid, or even the battery).
- Wire arrangement: Route the wires along the original engine wiring harness path, secure with high-temperature resistant clips, and maintain a distance of ≥5cm from high-temperature components such as the exhaust pipe; tightly wrap damaged parts of the wiring harness with high-temperature resistant insulating tape, and add rubber sleeves to friction parts.
- Starter relay wiring (if equipped): Strictly follow Toyota’s original factory standards — terminal 85 to the ignition switch start position, terminal 86 to ground (connect to the dedicated grounding point on the engine block, polish to remove rust for reliable grounding), terminal 30 to the positive battery terminal, and terminal 87 to the starter’s "S" terminal. After wiring, use a multimeter to test the on-off status of each terminal to confirm no short circuits.
5. Re-inspection and Reset
Check that the starter is installed without skew, the flange surface is tightly attached, and the drive gear meshes normally with the ring gear;
Gently pull the wires to confirm no looseness, the electrical connectors are free of oxidation or damage, and install terminal protection covers to prevent dust and moisture from entering;
Clean up tools and excess materials, and reconnect the negative battery cable (ensure the connection is firm with no virtual connection).
III. Post-installation Testing
1. No-load Test
2. Load Test
Weak starting: Troubleshoot virtual connection of the main power cable, low battery power, or slipping of the overrunning clutch;
Gear rattling: Re-calibrate the meshing gap or check wear of the flywheel ring gear;
Solenoid not engaging: Test the control wire voltage, relay working status, or solenoid failure.
References:

