
28100-22040 Toyota Starter 12V 1.2KW
Applicable models:For Toyota Avensis and Corolla
Reference part number:28100-22040, 28100-22030, 28100-0D080, 28100-0D130, 28100-220, 281002203040, 428000-0340, 428000-0341, 17841, 2-2360-ND-2.
| Power horsepower : | 12V 1.2KW |
| Number of feet : | 9T |
| Size : | 24*18*17single unit inner box |
| Weight : | net weight:2.8KG gross weight:2.9KG |
| Packaging : | Neutral kraft paper packaging |
| Spot/Pre sale : | Spot goods |
| Warranty : | 1 year |
| Product number : |
| Type : | starter |
| Specification : | 12V 1.2KW |
| Number of feet : | 9T |
| Brand : | nuojin |
| Number : | 28100-22040 28100-22030 |
| Quality : | new |
| Delivery time : | 10 day |





Product Overview
The 28100-22040-series starter motor (OE 28100-22040, 28100-22030, 428000-0340) is a new, OE-spec replacement starting component built for the Toyota Avensis and Corolla. Rated at 12V 1.2KW with a 9-tooth drive pinion, this starter delivers reliable cranking torque so your Toyota starts dependably every time.
This aftermarket unit matches the original starting-system requirements of the Toyota Avensis / Corolla engine family. It adopts a dependable solenoid switch and gear assembly for reliable engagement. The unit is stocked in-house, backed by a 1-year warranty with a 10-day dispatch lead time. Reliable cranking-torque design guarantees dependable start performance for your 12V vehicle.
Key physical specs: net weight 2.8 kg, gross weight 2.9 kg, overall dimensions 24 x 18 x 17 cm, supplied in a neutral kraft inner carton.
Toyota Avensis / Corolla and 12V Starting System
The Toyota Avensis and Corolla rely on a correct 12V starter match so the engine starts reliably under normal electrical load and in cold conditions. This starter uses a 9-tooth pinion engineered to mesh precisely with the engine flywheel ring gear for dependable engagement, delivering stable operation after installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| OE numbers | 28100-22040, 28100-22030, 28100-0D080, 28100-0D130, 28100-220, 281002203040, 428000-0340, 428000-0341, 17841, 2-2360-ND-2 |
| Voltage | 12V |
| Power | 1.2KW |
| Drive pinion | 9-tooth (9T) |
| Application | Toyota Avensis, Corolla |
| Quality | New |
| Warranty | 1 year |
| Net weight | 2.8 kg |
| Gross weight | 2.9 kg |
| Dimensions | 24 x 18 x 17 cm |
| Packaging | Neutral kraft box |
| Lead time | 10 days, in stock |
Engine Compatibility and Cross Reference
This starter motor fits Toyota Avensis and Corolla. Do not rely solely on the vehicle model for fitment validation; always verify the engine model, old-starter OE number, pinion tooth count and power rating stamped on your original starter housing.
| Equipment | Application | Typical Vehicles |
|---|---|---|
| Toyota | Mid-size sedan | Toyota Avensis |
| Toyota | Compact sedan | Toyota Corolla |
| Passenger use | Sedan | Related Toyota applications |
Multiple OE numbers exist across different production batches for this same starter family. If your original starter housing carries any one of the listed part numbers, the 28100-22040-series unit is a direct drop-in replacement.
What to Look for in a Replacement
Follow these five verification steps before placing your order to avoid wrong-part returns:
1. Check the nameplate data on your old starter: confirm the rated power is 1.2KW @12V. Different voltage or power ratings are not interchangeable.
2. Count the pinion teeth: this unit requires 9T. An incorrect tooth count will destroy the flywheel ring gear.
3. Confirm your vehicle is a Toyota Avensis or Corolla. Other engine families use different starter assemblies.
4. Match the OE / reference part numbers stamped on your original starter housing.
5. Weight cross-check: a genuine matching unit weighs about 2.8 kg net; a significant weight difference indicates the wrong assembly or low-grade build quality.
Application Scenarios
Independent repair shops and auto-electric workshops servicing Toyota Avensis and Corolla vehicles across Asia, Africa, the Middle East, Europe and Latin America.
Parts counters and jobbers stocking Japanese sedan starting and charging electrical components.
Toyota fleet operators, taxi services and repair facilities maintaining Avensis and Corolla.
Used car export traders supplying second-hand Toyotas to global secondary markets.
Maintenance teams restoring vehicles to factory-standard condition.
Installation Steps and Precautions
Installation must comply with the assembly specifications for low-voltage electrical equipment and the general requirements for engine starting systems. The following are standardized installation steps, including compatibility inspection and practical operation precautions, to ensure stable operation after installation.
Pre-Installation Preparation
Power cut protection: Turn off the engine ignition switch and disconnect the negative battery cable to avoid short circuits caused by accidental circuit contact during installation.
Tool preparation: Prepare a torque wrench, 14-19mm socket, screwdriver, wire harness clips, conductive paste, metal cleaner and rags. Have small accessories such as gaskets of the same specification ready.
Component and Compatibility Inspection
Confirm the new starter is the 12V 1.2KW model and compatible with the engine of the target vehicle.
Check that the starter housing has no cracks, the drive gear has no broken teeth or excessive wear, the gear expands and contracts flexibly when toggled manually, and the bearing rotates without jamming.
When replacing an old starter, clean the oil stains and rust at the old installation position. If the flywheel ring gear has missing teeth, severe wear or other defects, replace the ring gear before installing the starter.
Cleaning the Installation Workstation
The starter is usually installed at the engine flywheel housing. For some vehicles, first remove the surrounding air filter box, small pipeline brackets or wire harness shields, clear obstructing wire harnesses, and reserve sufficient operating space to prevent component interference during installation.
Securing the Main Body of the Starter
Firmly fit the starter onto the mounting surface of the flywheel housing. Gently toggle the drive gear by hand to confirm it aligns with the flywheel ring gear without misalignment or jamming, so as to ensure smooth engagement during subsequent startup.
Pre-tighten 2-3 matching fixing bolts diagonally, then tighten them to the standard torque of 35+/-5 Nm with a torque wrench (fine-tune with reference to the corresponding Toyota maintenance manual). Insufficient torque leads to violent vibration during operation, while excessive torque may damage the housing or the flywheel housing threads.
Connecting the Electrical Circuits
Main power terminal (Terminal 30): Locate the starter main power terminal and connect the thick power wire from the battery. Before connection, wipe the terminal with a cleaner to remove the oxide layer; if necessary, apply a small amount of conductive paste to reduce contact resistance. Tighten the terminal nut to 8+/-2 Nm to prevent the terminal from overheating and ablation when a large current passes through the 12V circuit.
Control terminal (Terminal 50): Gently insert the plug of the solenoid control terminal. Do not insert or pull it forcefully to avoid bending and damaging the pins. When arranging the wire harness, keep it away from rotating components such as the engine pulley and fan. Fix the harness with clips and tighten the bracket bolts to 5+/-1 Nm to prevent wear and leakage during operation.
Finalization and Functional Testing
Reinstall the previously removed components such as the air filter box and pipeline brackets in sequence, and confirm all shields and clips are properly installed. Reconnect the negative battery cable, tighten the terminal nut, and check for no looseness.
Conduct a no-load test: turn on the ignition switch, start the starter briefly, and check that it operates smoothly without abnormal noise and the drive gear expands and contracts normally. Then start the engine and verify the starter drives the flywheel smoothly without abnormal gear meshing noise.
If startup is weak, check whether battery voltage is 12V or higher. If there is abnormal meshing noise, readjust the installation angle of the starter or inspect the flywheel ring gear. If the starter has no response, troubleshoot whether the control terminal plug is poorly connected.
FAQ
Q: Does this starter fit all Toyota Avensis and Corolla?
A: This 28100-22040-series starter is built for Toyota Avensis and Corolla. Always confirm your vehicle and old-starter OE number before ordering.
Q: My old starter shows OE number 28100-22030 or 428000-0340 or 28100-0D080. Will 28100-22040 work?
A: Yes. These OE numbers belong to the same starter family, differing only by production revision and market specification, so the 28100-22040-series unit serves as a direct replacement.
Q: Is this a 1.1KW or 1.2KW starter?
A: The factory specification of this unit is 12V 1.2KW, as confirmed by the product attributes and details. The original listing title showing 1.1KW was inaccurate, so this starter is rated 1.2KW.
Q: What is the normal cranking voltage for a 12V system?
A: Under cranking condition, battery terminal voltage should stay above 10V. If voltage drops sharply below 9V during cranking, inspect battery health, battery cables and ground connections rather than only the starter itself.
Q: What is your warranty and lead time?
A: Goods are in stock with a 10-day dispatch lead time. A 1-year warranty applies from installation date; it excludes damage caused by mis-installation, flywheel ring-gear damage, poor cable connections or vehicle electrical-system faults.
In Practice
For technicians working on Toyota Avensis / Corolla platforms: before removing the existing starter motor, perform starting-system diagnostics. Measure battery terminal voltage under cranking load. Defective batteries, corroded cables, bad ground points or damaged flywheel ring gear can mimic starter-failure symptoms, so do not replace the starter blindly. Always disconnect the battery negative terminal before commencing removal work.
Take photos of wiring terminals and bolt positions during disassembly to avoid mis-wiring during reassembly. Inspect the flywheel ring gear for chipped or worn teeth before fitting the new starter, because a damaged ring gear will quickly destroy the new starter pinion. Tighten mounting bolts to the Toyota official workshop-manual torque specifications.
References
The installation method and related precautions are standardized content summarized and integrated based on the universal assembly specifications of Toyota engine starting systems, industry installation standards for low-voltage starters of the same specification, and practical experience in the automotive repair field. Equipment applications are compiled from original-equipment fitment data for the 28100-22040-series starter motor family covering Toyota Avensis and Corolla applications.
About the Author
This article was written by the senior auto-electric technician team at Nuojin Auto Parts, with over 15 years of hands-on experience in automotive charging and starting systems.
Our engineers specialise in Japanese, European, Korean, American and Chinese vehicle charging-system diagnostics, aftermarket alternator and starter-motor cross-referencing, and factory-spec electrical-system restoration for global markets. Every product listing on this site is backed by real bench-tested fitment data and first-hand repair experience, not just copied from manufacturer manuals.
If you have any question about this starter motor or your engine starting system, contact our technical team and we will help you confirm the correct part for your application.
Nuojin Auto Parts is a professional starter and alternator supplier based in Hejian, Hebei, China, running factory-grade bench testing on every production batch. We support distributors, wholesalers and repair shops worldwide with correct-fit sourcing, a 1-year warranty and responsive after-sales technical assistance.

